Planed Jatoba Hardwood Planks
Planed and sanded Jatoba planks thicker than 6 mm, sourced from Hymenaea spp., ideal for custom furniture fabrication. Falls under HTS 4407.29.02.85 due to being sawn or sliced tropical wood of Jatoba species, end-jointed where applicable.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If not specifically identified as Jatoba but other tropical
Unspecified tropical sawn wood over 6 mm thick defaults to broader 'other' tropical wood subheading without Jatoba specification.
If plywood made from Jatoba veneers
Layered plywood with Jatoba face and core veneers is classified under plywood headings rather than sawn lumber.
If cut into small finished articles like handles
Worked wood transformed into completed articles like tool handles moves out of sawn lumber to other worked wood articles.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Label shipments clearly with species name 'Jatoba (Hymenaea spp.)' per Lacey Act; inspect for end-jointing compliance; avoid mixing with other tropical species to prevent misclassification
Related Products under HTS 4407.29.02.85
Jatoba Sawn Lumber Boards
These are Jatoba (Hymenaea spp.) wood boards sawn lengthwise with a thickness exceeding 6 mm, typically planed and sanded for smoothness. Classified under HTS 4407.29.02.85 as tropical wood sawn or chipped lengthwise, sliced or peeled, specifically Jatoba also known as Brazilian Cherry.
Sliced Jatoba Veneer Lumber Sheets
Thin sheets of Jatoba wood sliced lengthwise exceeding 6 mm thickness, sanded for cabinetry use. HTS 4407.29.02.85 applies as sliced or peeled tropical wood specifically Jatoba (Brazilian Cherry).
End-Jointed Jatoba Finger-Joint Lumber
Jatoba (Hymenaea spp.) lumber blocks end-jointed for stability, sawn over 6 mm thick, planed smooth. Specifically under HTS 4407.29.02.85 for processed tropical Jatoba sawn wood.
Sanded Jatoba Tropical Hardwood Beams
Large Jatoba beams sawn lengthwise, sanded, thickness >6 mm for structural or decorative use. Classified HTS 4407.29.02.85 as other tropical wood sawn lumber of Jatoba species.
Jatoba S4S Lumber (Surfaced Four Sides)
Jatoba wood lumber surfaced on four sides (S4S), planed and sanded, exceeding 6 mm thick. HTS 4407.29.02.85 covers this processed form of Brazilian Cherry sawn tropical wood.
Brazilian Cherry Jatoba Flooring Blanks
Rough sawn Jatoba blanks cut to flooring widths, thickness over 6 mm, lightly sanded. Fits HTS 4407.29.02.85 as sawn tropical Jatoba (Hymenaea spp., Brazilian Cherry) lumber.