End-Jointed Jatoba Finger-Joint Lumber
Jatoba (Hymenaea spp.) lumber blocks end-jointed for stability, sawn over 6 mm thick, planed smooth. Specifically under HTS 4407.29.02.85 for processed tropical Jatoba sawn wood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If Ipe or other specified tropical hardwood
Other named tropical species like Ipe have distinct statistical suffixes under the same thickness category.
If made into coniferous door components
Assembled Jatoba elements for doors may classify as wooden doors if meeting assembly criteria.
If shaped into dowels or turnings
Further machining into cylindrical dowels reclassifies as worked wood articles.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Document finger-jointing process to confirm compliance with 'end-jointed' allowance; ensure no binders exceed specs; segregate from rough sawn wood shipments
Related Products under HTS 4407.29.02.85
Jatoba Sawn Lumber Boards
These are Jatoba (Hymenaea spp.) wood boards sawn lengthwise with a thickness exceeding 6 mm, typically planed and sanded for smoothness. Classified under HTS 4407.29.02.85 as tropical wood sawn or chipped lengthwise, sliced or peeled, specifically Jatoba also known as Brazilian Cherry.
Planed Jatoba Hardwood Planks
Planed and sanded Jatoba planks thicker than 6 mm, sourced from Hymenaea spp., ideal for custom furniture fabrication. Falls under HTS 4407.29.02.85 due to being sawn or sliced tropical wood of Jatoba species, end-jointed where applicable.
Sliced Jatoba Veneer Lumber Sheets
Thin sheets of Jatoba wood sliced lengthwise exceeding 6 mm thickness, sanded for cabinetry use. HTS 4407.29.02.85 applies as sliced or peeled tropical wood specifically Jatoba (Brazilian Cherry).
Sanded Jatoba Tropical Hardwood Beams
Large Jatoba beams sawn lengthwise, sanded, thickness >6 mm for structural or decorative use. Classified HTS 4407.29.02.85 as other tropical wood sawn lumber of Jatoba species.
Jatoba S4S Lumber (Surfaced Four Sides)
Jatoba wood lumber surfaced on four sides (S4S), planed and sanded, exceeding 6 mm thick. HTS 4407.29.02.85 covers this processed form of Brazilian Cherry sawn tropical wood.
Brazilian Cherry Jatoba Flooring Blanks
Rough sawn Jatoba blanks cut to flooring widths, thickness over 6 mm, lightly sanded. Fits HTS 4407.29.02.85 as sawn tropical Jatoba (Hymenaea spp., Brazilian Cherry) lumber.