Sanded Keruing Decking Boards
Sanded Keruing decking boards, sawn lengthwise 1x6 profile exceeding 6mm thick from Dipterocarpus spp. tropical hardwood. Classified HTS 4407.29.0216 for exterior-grade sawn lumber valued for natural durability and insect resistance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness ≤6mm
Thinner sliced Keruing automatically becomes veneer under heading 4408 regardless of end use.
If molded profiled edges
Keruing with tongue-and-groove or machined profiles for flooring shifts to heading 4410.
If rough logs
Unprocessed Keruing logs remain in Chapter 44 heading 4403 for fuel or raw wood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure bark-free and sapwood trimmed per import regulations; test for formaldehyde if any binders used in processing; declare exact thickness to avoid veneer misclassification
Related Products under HTS 4407.29.02.16
Keruing Sawn Lumber 1x6
Keruing (Dipterocarpus spp.) wood sawn lengthwise to 1-inch thickness by 6-inch width, exceeding 6mm thick, typically planed for smooth surfaces. Classified under HTS 4407.29.0216 as sawn tropical wood of Keruing species, not further manufactured into panels or boards. Used primarily for interior joinery and furniture framing.
Planed Keruing Board 2x4
Planed and sanded Keruing timber boards measuring 2x4 inches, sawn lengthwise from Dipterocarpus logs, thickness over 6mm. Meets HTS 4407.29.0216 for processed tropical Keruing sawn wood used in construction framing and decking. Durable reddish-brown hardwood resistant to decay.
Keruing End-Jointed Studs
End-jointed Keruing (Dipterocarpus spp.) studs sawn to 2x4 dimensions, planed and exceeding 6mm thickness for structural use. HTS 4407.29.0216 covers this finger-jointed tropical sawn lumber ideal for heavy-duty framing in humid climates.
Keruing Sawn Timber Beams
Large Keruing sawn timber beams 4x8 inches from Dipterocarpus spp., planed surfaces exceeding 6mm thickness. HTS 4407.29.0216 for structural tropical sawn wood used in bridge construction and heavy framing.
Planed Keruing Stair Treads
Planed Keruing stair tread blanks sawn to standard dimensions exceeding 6mm thick from Dipterocarpus tropical wood. Fits HTS 4407.29.0216 as unfinished sawn lumber before final profiling for interior stairs.
Keruing Furniture Grade Planks
Select-grade Keruing planks sawn and sanded for furniture, 1.5-inch thick exceeding 6mm from Dipterocarpus spp. HTS 4407.29.0216 applies to this tropical sawn lumber used for table tops and cabinetry.