Keruing End-Jointed Studs
End-jointed Keruing (Dipterocarpus spp.) studs sawn to 2x4 dimensions, planed and exceeding 6mm thickness for structural use. HTS 4407.29.0216 covers this finger-jointed tropical sawn lumber ideal for heavy-duty framing in humid climates.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If laminated into beams
Engineered laminated Keruing lumber classified under densified or glued wood products in 4412.
If coniferous like pine
Similar sawn lumber but from non-tropical coniferous species falls under 4407.11.
If pallet materials
Keruing cut specifically for pallets reclassified under wooden packing cases heading 4415.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document end-jointing process to avoid reclassification as assembled wood; provide mill certificates for strength grading; check for kiln-drying certificates to meet moisture content rules
Related Products under HTS 4407.29.02.16
Keruing Sawn Lumber 1x6
Keruing (Dipterocarpus spp.) wood sawn lengthwise to 1-inch thickness by 6-inch width, exceeding 6mm thick, typically planed for smooth surfaces. Classified under HTS 4407.29.0216 as sawn tropical wood of Keruing species, not further manufactured into panels or boards. Used primarily for interior joinery and furniture framing.
Planed Keruing Board 2x4
Planed and sanded Keruing timber boards measuring 2x4 inches, sawn lengthwise from Dipterocarpus logs, thickness over 6mm. Meets HTS 4407.29.0216 for processed tropical Keruing sawn wood used in construction framing and decking. Durable reddish-brown hardwood resistant to decay.
Sanded Keruing Decking Boards
Sanded Keruing decking boards, sawn lengthwise 1x6 profile exceeding 6mm thick from Dipterocarpus spp. tropical hardwood. Classified HTS 4407.29.0216 for exterior-grade sawn lumber valued for natural durability and insect resistance.
Keruing Sawn Timber Beams
Large Keruing sawn timber beams 4x8 inches from Dipterocarpus spp., planed surfaces exceeding 6mm thickness. HTS 4407.29.0216 for structural tropical sawn wood used in bridge construction and heavy framing.
Planed Keruing Stair Treads
Planed Keruing stair tread blanks sawn to standard dimensions exceeding 6mm thick from Dipterocarpus tropical wood. Fits HTS 4407.29.0216 as unfinished sawn lumber before final profiling for interior stairs.
Keruing Furniture Grade Planks
Select-grade Keruing planks sawn and sanded for furniture, 1.5-inch thick exceeding 6mm from Dipterocarpus spp. HTS 4407.29.0216 applies to this tropical sawn lumber used for table tops and cabinetry.