Sawn Balsa Wood Lumber 1x4x8 ft
Kiln-dried balsa wood boards sawn lengthwise to dimensions of 1 inch thick, 4 inches wide, and 8 feet long, exceeding 6 mm thickness. Classified under HTS 4407.22.00.06 as balsa (Ochroma lagopus), a tropical wood, planed and sanded for model building and hobby use.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +25.0% | 25% |
| 🇲🇽Mexico | Free | — | Free |
| 🇨🇦Canada | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further machined into sheets or profiled
Wood sheets and profiled wood (veneer >6mm) fall under 4408 if cut to specific patterns beyond simple planing.
If cut to length and width for retail sale
Other worked wood like cut-to-size pieces for hobby use may classify under 4421 as other articles of wood.
If density ≤0.5 g/cm³ and agglomerated into plywood
Balsa plywood from these sawn pieces would move to heading 4412 for densified or laminated wood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Ochroma lagopus with phytosanitary certificates to confirm balsa classification
• Provide documentation proving thickness exceeds 6 mm and sawn lengthwise to avoid reclassification to veneers
• Check for end-jointing; if present, ensure it meets 'end-jointed' allowance under heading 4407
Related Products under HTS 4407.22.00.06
Planed Balsa Wood Sheets 1/4 inch Thick
Planed balsa wood panels measuring 24x36 inches and 1/4 inch (6.35 mm) thick, sourced from Ochroma lagopus tropical wood. This product fits HTS 4407.22.00.06 as sawn or sliced tropical balsa exceeding 6 mm thickness, sanded for aerospace model applications.
Sanded Balsa Wood Planks for RC Aircraft
Specially sanded balsa planks 2x6 inches cross-section, 4 feet long, from Ochroma lagopus, thickness over 6 mm. Used in radio-controlled model aircraft construction, classified in HTS 4407.22.00.06 for tropical balsa sawn lengthwise.
End-Jointed Balsa Wood Strips 1/2x1/2 inch
Finger-jointed balsa strips 1/2 x 1/2 inch cross-section, 36 inches long, from tropical balsa (Ochroma lagopus), thickness exceeding 6 mm. HTS 4407.22.00.06 covers end-jointed tropical balsa sawn lengthwise for structural model use.
Balsa Wood Blocks for Surfboard Cores 12x12x2 inch
Rough-sawn balsa blocks 12x12x2 inches from Ochroma lagopus, planed on two sides, thickness 50.8 mm >6 mm. Ideal for surfboard core lamination, under HTS 4407.22.00.06 as tropical balsa sawn lengthwise.
Sliced Balsa Wood Panels for Wind Turbine Blades
Sliced lengthwise balsa panels 1 meter x 2 meter x 20 mm thick from tropical Ochroma lagopus. Used in wind turbine blade cores, classified HTS 4407.22.00.06 for sawn/peeled tropical balsa exceeding 6 mm.
Kiln-Dried Balsa Framing Lumber 2x4
Kiln-dried 2x4 balsa lumber, 10 feet long, from Ochroma lagopus tropical wood, sanded and planed. HTS 4407.22.00.06 applies to this sawn lengthwise tropical balsa over 6 mm thick for lightweight framing.