Planed Balsa Wood Sheets 1/4 inch Thick
Planed balsa wood panels measuring 24x36 inches and 1/4 inch (6.35 mm) thick, sourced from Ochroma lagopus tropical wood. This product fits HTS 4407.22.00.06 as sawn or sliced tropical balsa exceeding 6 mm thickness, sanded for aerospace model applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sliced into veneers ≤6 mm thick
Thinly sliced or peeled balsa classifies as veneer sheets under 4408.90 regardless of tropical origin.
If assembled into cellular wooden panels
Balsa core panels for composites fall under 4418 as reconstructed wood materials.
If from non-tropical balsa-like species
Similar low-density woods not specified as tropical balsa go to other coniferous/non-coniferous categories.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include fumigation certificates as balsa is prone to insect issues common in tropical imports
• Measure thickness precisely; products ≤6 mm shift to Chapter 44 veneers (4408)
• Label origin clearly to distinguish from non-tropical woods avoiding higher general duties
Related Products under HTS 4407.22.00.06
Sawn Balsa Wood Lumber 1x4x8 ft
Kiln-dried balsa wood boards sawn lengthwise to dimensions of 1 inch thick, 4 inches wide, and 8 feet long, exceeding 6 mm thickness. Classified under HTS 4407.22.00.06 as balsa (Ochroma lagopus), a tropical wood, planed and sanded for model building and hobby use.
Sanded Balsa Wood Planks for RC Aircraft
Specially sanded balsa planks 2x6 inches cross-section, 4 feet long, from Ochroma lagopus, thickness over 6 mm. Used in radio-controlled model aircraft construction, classified in HTS 4407.22.00.06 for tropical balsa sawn lengthwise.
End-Jointed Balsa Wood Strips 1/2x1/2 inch
Finger-jointed balsa strips 1/2 x 1/2 inch cross-section, 36 inches long, from tropical balsa (Ochroma lagopus), thickness exceeding 6 mm. HTS 4407.22.00.06 covers end-jointed tropical balsa sawn lengthwise for structural model use.
Balsa Wood Blocks for Surfboard Cores 12x12x2 inch
Rough-sawn balsa blocks 12x12x2 inches from Ochroma lagopus, planed on two sides, thickness 50.8 mm >6 mm. Ideal for surfboard core lamination, under HTS 4407.22.00.06 as tropical balsa sawn lengthwise.
Sliced Balsa Wood Panels for Wind Turbine Blades
Sliced lengthwise balsa panels 1 meter x 2 meter x 20 mm thick from tropical Ochroma lagopus. Used in wind turbine blade cores, classified HTS 4407.22.00.06 for sawn/peeled tropical balsa exceeding 6 mm.
Kiln-Dried Balsa Framing Lumber 2x4
Kiln-dried 2x4 balsa lumber, 10 feet long, from Ochroma lagopus tropical wood, sanded and planed. HTS 4407.22.00.06 applies to this sawn lengthwise tropical balsa over 6 mm thick for lightweight framing.