Sanded Lodgepole Pine Studs
Lodgepole pine (Pinus contorta) sawn studs 38x89mm, sanded, kiln-dried for residential framing. Classified HTS 4407.19.00 excluding S-P-F designation.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If suitable for coniferous panelling
Appearance-grade boards for walls shift to panelling subheading.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify stud grade (No.1, No.2) in commercial invoice
• Bundle securely to prevent grade damage in transit
• Confirm non-Northern origin to avoid softwood lumber duties
Related Products under HTS 4407.19.00
Sawn Douglas Fir Lumber 2x4
Kiln-dried Douglas fir lumber sawn lengthwise to standard 2x4 dimensions (38mm x 89mm thick), planed and sanded for smooth finish, exceeding 6mm thickness. Classified under HTS 4407.19.00 as 'other' coniferous sawn wood not specified as S-P-F or Hem-fir, used primarily for framing in construction.
Planed Western Red Cedar Decking Boards
Sliced and planed Western red cedar boards (thickness 25mm x 150mm), sanded for outdoor decking applications. Falls under HTS 4407.19.00 as coniferous sawn wood 'other' than S-P-F or Hem-fir, valued for natural rot resistance.
Sanded Larch Sawn Timber
European larch (Larix decidua) sawn lengthwise, sanded, thickness 40mm x 200mm width for structural beams. HTS 4407.19.00 covers this 'other' coniferous softwood not fitting S-P-F or Hem-fir categories.
End-Jointed Pine Beam Blanks
Finger-jointed Lodgepole pine sawn boards (50mm thick), end-jointed for stability, exceeding 6mm. Classified HTS 4407.19.00 as 'other' coniferous lumber for further fabrication.
Sliced Alaskan Yellow Cedar Planks
Chipped and sliced Cupressus nootkatensis planks, planed, 30mm thickness for boat building. HTS 4407.19.00 for this 'other' coniferous species prized for durability.
Kiln-Dried Engelmann Spruce Lumber
Sawn Engelmann spruce (Picea engelmannii) boards, kiln-dried to 12% moisture, sanded, thickness 25mm. Under HTS 4407.19.00 as non-S-P-F coniferous sawn wood for musical instruments.