Sanded Larch Sawn Timber
European larch (Larix decidua) sawn lengthwise, sanded, thickness 40mm x 200mm width for structural beams. HTS 4407.19.00 covers this 'other' coniferous softwood not fitting S-P-F or Hem-fir categories.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness between 6mm and 75mm specifically
Narrower thickness range for tropical conifers, but larch as temperate moves by dimension.
If cellular wooden packing cases assembled
Structural sawn wood used in assembled pallets reclassifies to 4418.
If ground into wood pellets
Agglomerated by-products like sawdust from processing fall under fuel pellets.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Obtain fumigation certificate if not kiln-dried to meet USDA APHIS rules
• Specify heartwood vs sapwood content in declarations
• Avoid bundling with hardware to prevent set classification
Related Products under HTS 4407.19.00
Sawn Douglas Fir Lumber 2x4
Kiln-dried Douglas fir lumber sawn lengthwise to standard 2x4 dimensions (38mm x 89mm thick), planed and sanded for smooth finish, exceeding 6mm thickness. Classified under HTS 4407.19.00 as 'other' coniferous sawn wood not specified as S-P-F or Hem-fir, used primarily for framing in construction.
Planed Western Red Cedar Decking Boards
Sliced and planed Western red cedar boards (thickness 25mm x 150mm), sanded for outdoor decking applications. Falls under HTS 4407.19.00 as coniferous sawn wood 'other' than S-P-F or Hem-fir, valued for natural rot resistance.
End-Jointed Pine Beam Blanks
Finger-jointed Lodgepole pine sawn boards (50mm thick), end-jointed for stability, exceeding 6mm. Classified HTS 4407.19.00 as 'other' coniferous lumber for further fabrication.
Sliced Alaskan Yellow Cedar Planks
Chipped and sliced Cupressus nootkatensis planks, planed, 30mm thickness for boat building. HTS 4407.19.00 for this 'other' coniferous species prized for durability.
Kiln-Dried Engelmann Spruce Lumber
Sawn Engelmann spruce (Picea engelmannii) boards, kiln-dried to 12% moisture, sanded, thickness 25mm. Under HTS 4407.19.00 as non-S-P-F coniferous sawn wood for musical instruments.
Planed Eastern White Pine Boards
Sawn Pinus strobus eastern white pine, planed and end-jointed, 38mm x 140mm for cabinetry blanks. HTS 4407.19.00 'other' coniferous softwood.