Sanded Pine Shelving Boards
Sanded radiata pine boards for shelving, 19mm thick, untreated, sawn lengthwise. HTS 4407.19.00.93 covers this other coniferous category excluding named mixes. Ready for retail furniture applications.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-cut to shelf lengths with edge finishing
Finished wooden shelving articles classify under 4421.91.
If edges profiled for joining
Profiled boards for shelving become mouldings under 4412.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Retail-ready packaging may trigger set classification review
• Pine species declaration; radiata vs lodgepole affects quotas
• Formaldehyde emission testing if for indoor furniture use
Related Products under HTS 4407.19.00.93
Sawn Douglas Fir Lumber 2x4
Rough-sawn Douglas fir lumber measuring 2 inches by 4 inches by 8 feet, planed on two sides, thickness exceeding 6mm. Classified under HTS 4407.19.00.93 as coniferous wood sawn lengthwise, not chemically treated, for general construction use. Meets criteria for 'other' untreated coniferous sawn wood beyond specific species like S-P-F or Hem-fir.
Sawn Western Red Cedar Boards
Sawn lengthwise Western red cedar boards, 1-inch thick by 6-inch wide, sanded surface, untreated. Falls under HTS 4407.19.00.93 as 'other' coniferous sawn or chipped wood exceeding 6mm thickness, not end-jointed or treated. Commonly used for exterior siding and decking.
Sawn Lodgepole Pine Planks
Sawn lodgepole pine planks, 8-foot lengths, planed and end-jointed, thickness 25mm. Classified in HTS 4407.19.00.93 as other untreated coniferous sawn wood, not specific S-P-F mixes. Used for interior paneling and furniture components.
Sawn Hemlock Lumber 4x6
Rough sawn hemlock timber beams 4x6 inches, untreated, thickness over 6mm. HTS 4407.19.00.93 applies to this 'other' coniferous sawn wood excluding Hem-fir mixes. Suitable for framing and structural beams.
Sliced Larch Veneer Backing Sheets
Sliced larch wood sheets, 8mm thick, used as backing for decorative panels, untreated. Under HTS 4407.19.00.93 as other coniferous wood sliced lengthwise exceeding 6mm, not planed beyond basic surfacing. For laminated flooring substrates.
Sawn Alaskan Yellow Cedar Timbers
Sawn Alaskan yellow cedar timbers, 12x12 inch cross-section, rough sawn, untreated. HTS 4407.19.00.93 for other coniferous sawn lengthwise wood >6mm thick. Used in marine construction and heavy framing.