Sawn Douglas Fir Lumber 2x4
Rough-sawn Douglas fir lumber measuring 2 inches by 4 inches by 8 feet, planed on two sides, thickness exceeding 6mm. Classified under HTS 4407.19.00.93 as coniferous wood sawn lengthwise, not chemically treated, for general construction use. Meets criteria for 'other' untreated coniferous sawn wood beyond specific species like S-P-F or Hem-fir.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from spruce-pine-fir mixed stands
S-P-F lumber falls under specific subheading 4407.11 for common North American coniferous mixes.
If chemically treated with preservatives
Treated coniferous sawn wood shifts to 4407.29 regardless of thickness over 6mm.
If further machined into profiled mouldings or beads
Additional machining like tonguing/grooving moves it from sawn lumber to Chapter 44 heading 4412.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain ISPM 15 compliant fumigation certificate if kiln-dried; raw sawn requires heat treatment proof
• Declare exact species and dimensions; misclassification to 4407.11 risks penalties
• Provide mill certificates verifying no chemical preservatives for 'not treated' status
Related Products under HTS 4407.19.00.93
Sawn Western Red Cedar Boards
Sawn lengthwise Western red cedar boards, 1-inch thick by 6-inch wide, sanded surface, untreated. Falls under HTS 4407.19.00.93 as 'other' coniferous sawn or chipped wood exceeding 6mm thickness, not end-jointed or treated. Commonly used for exterior siding and decking.
Sawn Lodgepole Pine Planks
Sawn lodgepole pine planks, 8-foot lengths, planed and end-jointed, thickness 25mm. Classified in HTS 4407.19.00.93 as other untreated coniferous sawn wood, not specific S-P-F mixes. Used for interior paneling and furniture components.
Sawn Hemlock Lumber 4x6
Rough sawn hemlock timber beams 4x6 inches, untreated, thickness over 6mm. HTS 4407.19.00.93 applies to this 'other' coniferous sawn wood excluding Hem-fir mixes. Suitable for framing and structural beams.
Sliced Larch Veneer Backing Sheets
Sliced larch wood sheets, 8mm thick, used as backing for decorative panels, untreated. Under HTS 4407.19.00.93 as other coniferous wood sliced lengthwise exceeding 6mm, not planed beyond basic surfacing. For laminated flooring substrates.
Sawn Alaskan Yellow Cedar Timbers
Sawn Alaskan yellow cedar timbers, 12x12 inch cross-section, rough sawn, untreated. HTS 4407.19.00.93 for other coniferous sawn lengthwise wood >6mm thick. Used in marine construction and heavy framing.
Planed Spruce Framing Lumber
Planed spruce 2x6 framing lumber, kiln-dried but untreated, thickness 38mm. Classifies under HTS 4407.19.00.93 as other non-S-P-F coniferous sawn wood. Standard for residential construction studs.