Rough Sawn Douglas Fir Lumber 2x4
Rough sawn Douglas fir lumber measuring 2 inches by 4 inches by 8 feet, cut lengthwise with a thickness exceeding 6 mm and not planed, sanded, or end-jointed. Classified under HTS 4407.19.00.92 as rough coniferous wood from Douglas fir, which is neither treated nor finger-jointed.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from non-coniferous species like oak or maple
Non-coniferous sawn wood falls under the 'other' hardwood category in the same thickness range.
If planed, sanded, or finger-jointed
Surface processing beyond rough sawn moves it to the finished coniferous lumber subheading.
If in log form rather than sawn lengthwise
Unsawn wood in log form is classified under Chapter 44 heading for logs rather than sawn lumber.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species identification through botanical certification to confirm coniferous classification and avoid misclassification as tropical hardwoods
• Ensure moisture content documentation complies with ISPM 15 if any kiln-drying occurred, even if not formally treated
• Provide mill certificates showing no chemical treatment to qualify for 'not treated' subheading
Related Products under HTS 4407.19.00.92
Rough Pine Framing Lumber 2x6
Rough cut radiata pine boards measuring 2x6 inches, sawn lengthwise with thickness over 6 mm, untreated and without end-jointing. Fits HTS 4407.19.00.92 as 'other' rough coniferous lumber not specifically enumerated like S-P-F or Hem-fir.
Rough Cedar Sawn Boards 1x8
Western red cedar boards sawn to 1x8 rough dimensions, thickness exceeding 6 mm, neither planed nor chemically treated. HTS 4407.19.00.92 covers this as rough, untreated 'other' coniferous sawn wood for siding or decking applications.
Rough Larch Lumber 4x4 Posts
Rough sawn European larch 4x4 posts, lengthwise cut with thickness >6 mm, untreated for fencing or structural use. Classified in HTS 4407.19.00.92 as other rough coniferous sawn wood.
Rough Spruce Studs 2x4x92
Rough sawn spruce studs cut to pre-cut 92-inch length for wall framing, thickness exceeding 6 mm, untreated. HTS 4407.19.00.92 as rough 'other' coniferous lumber not qualifying for S-P-F mixed stands.
Rough Hemlock Sawn Timber 6x8
Rough sawn hemlock timber beams 6x8 inch cross-section, lengthwise sliced exceeding 6 mm thick, untreated. Falls under HTS 4407.19.00.92 as other rough coniferous not specified as Hem-fir mix.
Rough Radiata Pine Decking 5/4x6
Rough sawn radiata pine decking boards 5/4x6 inch, thickness >6 mm, untreated for exterior applications. HTS 4407.19.00.92 for other rough coniferous sawn wood.