Rough Radiata Pine Decking 5/4x6
Rough sawn radiata pine decking boards 5/4x6 inch, thickness >6 mm, untreated for exterior applications. HTS 4407.19.00.92 for other rough coniferous sawn wood.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If specifically identified as Douglas fir
Statistical suffixes breakout major species within 'other' coniferous.
If pre-machined with profiles for decking
Machined or profiled decking boards classified as joinery products.
If sawdust compressed into briquettes
Processing waste agglomerated into fuel briquettes per subheading note.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Fumigation certificates mandatory for pine imports to prevent pinewood nematode issues
• Mark boards with grade stamps visible for Customs inspection
• Calculate duties based on green (rough) dimensions, not kiln-dried sizes
Related Products under HTS 4407.19.00.92
Rough Sawn Douglas Fir Lumber 2x4
Rough sawn Douglas fir lumber measuring 2 inches by 4 inches by 8 feet, cut lengthwise with a thickness exceeding 6 mm and not planed, sanded, or end-jointed. Classified under HTS 4407.19.00.92 as rough coniferous wood from Douglas fir, which is neither treated nor finger-jointed.
Rough Pine Framing Lumber 2x6
Rough cut radiata pine boards measuring 2x6 inches, sawn lengthwise with thickness over 6 mm, untreated and without end-jointing. Fits HTS 4407.19.00.92 as 'other' rough coniferous lumber not specifically enumerated like S-P-F or Hem-fir.
Rough Cedar Sawn Boards 1x8
Western red cedar boards sawn to 1x8 rough dimensions, thickness exceeding 6 mm, neither planed nor chemically treated. HTS 4407.19.00.92 covers this as rough, untreated 'other' coniferous sawn wood for siding or decking applications.
Rough Larch Lumber 4x4 Posts
Rough sawn European larch 4x4 posts, lengthwise cut with thickness >6 mm, untreated for fencing or structural use. Classified in HTS 4407.19.00.92 as other rough coniferous sawn wood.
Rough Spruce Studs 2x4x92
Rough sawn spruce studs cut to pre-cut 92-inch length for wall framing, thickness exceeding 6 mm, untreated. HTS 4407.19.00.92 as rough 'other' coniferous lumber not qualifying for S-P-F mixed stands.
Rough Hemlock Sawn Timber 6x8
Rough sawn hemlock timber beams 6x8 inch cross-section, lengthwise sliced exceeding 6 mm thick, untreated. Falls under HTS 4407.19.00.92 as other rough coniferous not specified as Hem-fir mix.