Rough Fir Siding Boards 1x10
Rough sawn fir siding boards 1x10 inch for exterior wall sheathing, thickness exceeding 6 mm, no surface treatment. Classified HTS 4407.19.00.92 as rough other coniferous lumber.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If tropical cedar or mahogany species
Tropical hardwoods have separate subheadings regardless of processing.
If fiberboard manufactured from fibers
Reconstituted wood panels from wood fibers classified under heading 4411.
If cut into roofing shingles
Chapter note excludes finished shingles from heading 4417 tools exception.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Texture documentation (rough sawn vs resawn) affects both classification and market value
• Bundle consistently sized boards to optimize container space and reduce claims
• Avoid pressure treatment post-import without reclassification consideration
Related Products under HTS 4407.19.00.92
Rough Sawn Douglas Fir Lumber 2x4
Rough sawn Douglas fir lumber measuring 2 inches by 4 inches by 8 feet, cut lengthwise with a thickness exceeding 6 mm and not planed, sanded, or end-jointed. Classified under HTS 4407.19.00.92 as rough coniferous wood from Douglas fir, which is neither treated nor finger-jointed.
Rough Pine Framing Lumber 2x6
Rough cut radiata pine boards measuring 2x6 inches, sawn lengthwise with thickness over 6 mm, untreated and without end-jointing. Fits HTS 4407.19.00.92 as 'other' rough coniferous lumber not specifically enumerated like S-P-F or Hem-fir.
Rough Cedar Sawn Boards 1x8
Western red cedar boards sawn to 1x8 rough dimensions, thickness exceeding 6 mm, neither planed nor chemically treated. HTS 4407.19.00.92 covers this as rough, untreated 'other' coniferous sawn wood for siding or decking applications.
Rough Larch Lumber 4x4 Posts
Rough sawn European larch 4x4 posts, lengthwise cut with thickness >6 mm, untreated for fencing or structural use. Classified in HTS 4407.19.00.92 as other rough coniferous sawn wood.
Rough Spruce Studs 2x4x92
Rough sawn spruce studs cut to pre-cut 92-inch length for wall framing, thickness exceeding 6 mm, untreated. HTS 4407.19.00.92 as rough 'other' coniferous lumber not qualifying for S-P-F mixed stands.
Rough Hemlock Sawn Timber 6x8
Rough sawn hemlock timber beams 6x8 inch cross-section, lengthwise sliced exceeding 6 mm thick, untreated. Falls under HTS 4407.19.00.92 as other rough coniferous not specified as Hem-fir mix.