Rough Sawn Redwood Select Heart 2x6
Rough sawn all-heart redwood 2x6 boards for premium applications. HTS 4407.19.0083 for untreated redwood sawn lengthwise coniferous >6mm, other category.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If ≥3 layers laminated
Densified or laminated wood products shift to heading 4413.
If custom cut-to-length <2m
Cut-to-size beyond standard becomes other worked wood.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Certify heartwood content >90%; use moisture meters at entry; segregate from construction commons
Related Products under HTS 4407.19.00.83
Sawn Redwood Lumber 2x4
Thickness-planed redwood (Sequoia sempervirens) lumber measuring 1.5 inches thick by 3.5 inches wide, sawn lengthwise for construction use. Classified under HTS 4407.19.0083 as untreated coniferous wood sawn or chipped lengthwise, exceeding 6mm thickness, specifically redwood other than finger-jointed. Meets chapter note including woody materials like this softwood species.
Redwood Siding Boards 1x6
Sanded redwood boards 1 inch thick by 5.5 inches wide, sliced lengthwise for exterior siding applications. Falls under 4407.19.0083 as other untreated redwood (Sequoia sempervirens) sawn or peeled coniferous wood over 6mm thick, not end-jointed.
Sawn Redwood Timbers 4x4
Rough-sawn redwood timbers 3.5x3.5 inches, planed on two sides for decking posts. HTS 4407.19.0083 covers this untreated redwood coniferous sawn wood exceeding 6mm, distinguished from end-jointed under .81.
Planed Redwood Decking 5/4x6
Thickness-planed 1-inch redwood decking boards by 5.5 inches wide for outdoor use. Classified as other untreated redwood sawn lengthwise coniferous wood >6mm under 4407.19.0083.
Sliced Redwood Veneer Backing 8mm
Sliced redwood sheets 8mm thick, sanded for furniture backing or panel cores. Fits 4407.19.0083 as peeled/sliced untreated redwood coniferous wood exceeding 6mm, not further processed.
Redwood Beam Blanks 6x8
Sawn and end-trimmed redwood blanks 5.5x7.25 inches for custom beams. Under HTS 4407.19.0083 as other untreated redwood sawn coniferous lumber >6mm thick.