Redwood Siding Boards 1x6
Sanded redwood boards 1 inch thick by 5.5 inches wide, sliced lengthwise for exterior siding applications. Falls under 4407.19.0083 as other untreated redwood (Sequoia sempervirens) sawn or peeled coniferous wood over 6mm thick, not end-jointed.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If chemically or thermally treated
Any preservation treatment shifts to 'treated' subheading regardless of species.
If further worked beyond planing/sanding
Other worked wood like beveled or patterned edges goes to heading 4421.
If from spruce/pine/fir (S-P-F)
Specific coniferous species like S-P-F have separate subheadings per notes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide ISPM-15 compliant fumigation docs if required; label as 'redwood' with scientific name; watch for kiln-dried claims pushing to treated category
Related Products under HTS 4407.19.00.83
Sawn Redwood Lumber 2x4
Thickness-planed redwood (Sequoia sempervirens) lumber measuring 1.5 inches thick by 3.5 inches wide, sawn lengthwise for construction use. Classified under HTS 4407.19.0083 as untreated coniferous wood sawn or chipped lengthwise, exceeding 6mm thickness, specifically redwood other than finger-jointed. Meets chapter note including woody materials like this softwood species.
Sawn Redwood Timbers 4x4
Rough-sawn redwood timbers 3.5x3.5 inches, planed on two sides for decking posts. HTS 4407.19.0083 covers this untreated redwood coniferous sawn wood exceeding 6mm, distinguished from end-jointed under .81.
Planed Redwood Decking 5/4x6
Thickness-planed 1-inch redwood decking boards by 5.5 inches wide for outdoor use. Classified as other untreated redwood sawn lengthwise coniferous wood >6mm under 4407.19.0083.
Sliced Redwood Veneer Backing 8mm
Sliced redwood sheets 8mm thick, sanded for furniture backing or panel cores. Fits 4407.19.0083 as peeled/sliced untreated redwood coniferous wood exceeding 6mm, not further processed.
Redwood Beam Blanks 6x8
Sawn and end-trimmed redwood blanks 5.5x7.25 inches for custom beams. Under HTS 4407.19.0083 as other untreated redwood sawn coniferous lumber >6mm thick.
Sanded Redwood Fence Boards 1x8
Sanded 1x8 redwood boards for fencing, sawn lengthwise untreated. 4407.19.0083 applies to this other redwood coniferous wood >6mm, planed/sanded but not end-jointed.