Sawn Hemlock Decking Boards
Sawn hemlock decking boards 5/4 x 6, rough texture for outdoor use but untreated, thickness >6mm. Classified HTS 4407.19.0065 as other sawn hemlock, no preservatives.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If kiln-dried below 19% moisture
Specific treated subheadings for kiln-dried coniferous in certain forms.
If shaped for flooring/decking assembly
Profiled or tongued/grooved decking as builders' joinery in 4418.
If coniferous but ≤6mm thick
Thickness threshold determines between 4407.10 and 4407.19+.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Recommend kiln-drying declaration even if untreated to meet stability standards
• Mark 'for interior use only' if not rated for weather to guide importers
Related Products under HTS 4407.19.00.65
Sawn Western Hemlock Lumber 2x4
Rough-sawn Western hemlock (Tsuga heterophylla) lumber measuring 2 inches by 4 inches by 8 feet, sliced lengthwise with thickness exceeding 6 mm, planed on two sides but not further treated. Classified under HTS 4407.19.0065 as 'other' sawn coniferous hemlock wood, not chemically treated, for general construction use.
Sanded Mountain Hemlock Planks
Sawn Mountain hemlock (Tsuga mertensiana) planks, sliced lengthwise, sanded surface, thickness 20mm, untreated for furniture making or paneling. HTS 4407.19.0065 covers other untreated hemlock sawn wood exceeding 6mm.
End-Jointed Hemlock Studs 2x6
Lengthwise sawn hemlock studs 2x6, end-jointed for stability but not finger-jointed per note exclusions, untreated, >6mm thick. HTS 4407.19.0065 for other hemlock sawn wood.
Sliced Hemlock Veneer Backing Sheets
Thin sliced hemlock sheets >6mm thick used as backing for decorative panels, sawn lengthwise, sanded, untreated. Covered by HTS 4407.19.0065 as other hemlock not further processed.
Planed Eastern Hemlock Beams
Planed Eastern hemlock (Tsuga canadensis) beams 6x8 inches, sawn lengthwise, untreated for timber framing. HTS 4407.19.0065 applies to other untreated hemlock exceeding 6mm.
Untreated Hemlock Framing Lumber 4x4
Sawn 4x4 hemlock posts for framing, planed and sanded lightly, untreated, exceeding 6mm thickness. HTS 4407.19.0065 for other hemlock sawn coniferous wood.