Planed Eastern Hemlock Beams
Planed Eastern hemlock (Tsuga canadensis) beams 6x8 inches, sawn lengthwise, untreated for timber framing. HTS 4407.19.0065 applies to other untreated hemlock exceeding 6mm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If other specific coniferous like larch
Statistical breakdowns for particular species within 'other' coniferous.
If cut into dowels or skewers
Further fashioned into articles like wooden dowels under 4421.
If in rough chips from processing
Wood chips from hemlock processing classify under 4403.12 for coniferous chips.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm regional origin; Eastern vs Western affects grading but not HTS
• Inspect for defects like knots; declare grade (No.1, etc.) accurately
• Avoid bundling with treated wood to prevent cross-contamination claims
Related Products under HTS 4407.19.00.65
Sawn Western Hemlock Lumber 2x4
Rough-sawn Western hemlock (Tsuga heterophylla) lumber measuring 2 inches by 4 inches by 8 feet, sliced lengthwise with thickness exceeding 6 mm, planed on two sides but not further treated. Classified under HTS 4407.19.0065 as 'other' sawn coniferous hemlock wood, not chemically treated, for general construction use.
Sanded Mountain Hemlock Planks
Sawn Mountain hemlock (Tsuga mertensiana) planks, sliced lengthwise, sanded surface, thickness 20mm, untreated for furniture making or paneling. HTS 4407.19.0065 covers other untreated hemlock sawn wood exceeding 6mm.
End-Jointed Hemlock Studs 2x6
Lengthwise sawn hemlock studs 2x6, end-jointed for stability but not finger-jointed per note exclusions, untreated, >6mm thick. HTS 4407.19.0065 for other hemlock sawn wood.
Sliced Hemlock Veneer Backing Sheets
Thin sliced hemlock sheets >6mm thick used as backing for decorative panels, sawn lengthwise, sanded, untreated. Covered by HTS 4407.19.0065 as other hemlock not further processed.
Untreated Hemlock Framing Lumber 4x4
Sawn 4x4 hemlock posts for framing, planed and sanded lightly, untreated, exceeding 6mm thickness. HTS 4407.19.0065 for other hemlock sawn coniferous wood.
Planed Hemlock 1x6 Boards
Sliced and planed hemlock (Tsuga spp.) boards nominally 1 inch by 6 inches, thickness over 6 mm after planing, untreated and suitable for interior trim or shelving. Fits HTS 4407.19.0065 as other untreated hemlock sawn lengthwise, not end-jointed.