Rough Sawn Douglas-Fir 4x14 Boards
Douglas-fir boards sawn to 4x14 inch dimensions (minimum 14 inches = 35.6 cm width), rough condition, untreated, for joists and headers in residential framing. HTS 4407.19.0056 specifies coniferous sawn wood ≥6mm thick, Douglas-fir, rough with min dimension ≥12.7 cm.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from spruce-pine-fir (S-P-F) mixed stands
S-P-F coniferous species have separate subheading 4407.10 designation.
If veneer sheets sliced from logs
Sliced or peeled sheets (under 6mm) classified in heading 4408 for veneers.
If assembled into builders' joinery like door frames
Pre-assembled wood joinery products move to heading 4418.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document chain of custody from harvest to ensure pure Douglas-fir species identification
• Inspect for any end-trimming that might trigger 'worked' classification
• Prepare for ISPM-15 compliance if bundled for overseas shipment
Related Products under HTS 4407.19.00.56
Rough Douglas-Fir Lumber 2x12
Rough-sawn Douglas-fir boards measuring 2 inches thick by 12 inches wide and typically 8-20 feet long, with all dimensions exceeding 12.7 cm in minimum width. Classified under HTS 4407.19.0056 as coniferous sawn wood, not treated, Douglas-fir species, rough condition. Used primarily for structural framing in construction.
Douglas-Fir Rough Timbers 8x8
Large rough-sawn Douglas-fir timbers with 8x8 inch cross-sections (minimum dimension 20.3 cm), lengths 12-40 feet, used for heavy construction beams. Falls under HTS 4407.19.0056 as untreated, rough Douglas-fir sawn lengthwise exceeding 6mm thickness. Sourced from Pacific Northwest forests.
Douglas-Fir Heavy Framing Lumber 6x12
Heavy structural rough-sawn Douglas-fir 6x12 inch lumber for bridge and commercial building applications, all dimensions >12.7 cm. Classified HTS 4407.19.0056: coniferous, Douglas-fir, untreated rough sawn wood exceeding 6mm thickness.
Rough Douglas-Fir Scaffold Planks 2x12x12ft
Rough-sawn Douglas-fir planks 2"x12"x12' specifically for scaffolding platforms, minimum width 12 inches (30.5 cm). HTS 4407.19.0056 for untreated rough Douglas-fir sawn lengthwise, thickness >6mm, min dimension ≥12.7 cm.
Douglas-Fir Rough Beams 10x10
Massive rough-sawn Douglas-fir beams 10x10 inches for exposed timber framing in lodges and barns, minimum dimension 25.4 cm. HTS 4407.19.0056 covers Douglas-fir coniferous sawn wood, rough, untreated, >6mm thick.
Wide Douglas-Fir Rough Decking 2x14
Rough Douglas-fir decking boards 2x14 inches wide for porch and patio flooring, exceeding 12.7 cm minimum dimension. Classified under HTS 4407.19.0056 as sawn coniferous Douglas-fir lumber, untreated and rough-sawn.