Rough Douglas-Fir Lumber 2x12
Rough-sawn Douglas-fir boards measuring 2 inches thick by 12 inches wide and typically 8-20 feet long, with all dimensions exceeding 12.7 cm in minimum width. Classified under HTS 4407.19.0056 as coniferous sawn wood, not treated, Douglas-fir species, rough condition. Used primarily for structural framing in construction.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If end-jointed or finger-jointed
End-jointed Douglas-fir moves to statistical suffix .0013 while keeping coniferous/Douglas-fir classification.
If planed, sanded, or finger-jointed after sawing
Planed or further worked coniferous wood shifts to Chapter 44 heading 4409 for processed lumber.
If identified as Western Hemlock instead of Douglas-fir
Mixed hemlock-fir stands classified separately under specific coniferous species suffixes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify species certification as Douglas-fir (Pseudotsuga menziesii) via botanical documentation to avoid reclassification
• Ensure all dimensions exceed 12.7 cm minimum and confirm rough-sawn status without planing
• Obtain phytosanitary certificate proving no heat/chemical treatment
Related Products under HTS 4407.19.00.56
Douglas-Fir Rough Timbers 8x8
Large rough-sawn Douglas-fir timbers with 8x8 inch cross-sections (minimum dimension 20.3 cm), lengths 12-40 feet, used for heavy construction beams. Falls under HTS 4407.19.0056 as untreated, rough Douglas-fir sawn lengthwise exceeding 6mm thickness. Sourced from Pacific Northwest forests.
Rough Sawn Douglas-Fir 4x14 Boards
Douglas-fir boards sawn to 4x14 inch dimensions (minimum 14 inches = 35.6 cm width), rough condition, untreated, for joists and headers in residential framing. HTS 4407.19.0056 specifies coniferous sawn wood ≥6mm thick, Douglas-fir, rough with min dimension ≥12.7 cm.
Douglas-Fir Heavy Framing Lumber 6x12
Heavy structural rough-sawn Douglas-fir 6x12 inch lumber for bridge and commercial building applications, all dimensions >12.7 cm. Classified HTS 4407.19.0056: coniferous, Douglas-fir, untreated rough sawn wood exceeding 6mm thickness.
Rough Douglas-Fir Scaffold Planks 2x12x12ft
Rough-sawn Douglas-fir planks 2"x12"x12' specifically for scaffolding platforms, minimum width 12 inches (30.5 cm). HTS 4407.19.0056 for untreated rough Douglas-fir sawn lengthwise, thickness >6mm, min dimension ≥12.7 cm.
Douglas-Fir Rough Beams 10x10
Massive rough-sawn Douglas-fir beams 10x10 inches for exposed timber framing in lodges and barns, minimum dimension 25.4 cm. HTS 4407.19.0056 covers Douglas-fir coniferous sawn wood, rough, untreated, >6mm thick.
Wide Douglas-Fir Rough Decking 2x14
Rough Douglas-fir decking boards 2x14 inches wide for porch and patio flooring, exceeding 12.7 cm minimum dimension. Classified under HTS 4407.19.0056 as sawn coniferous Douglas-fir lumber, untreated and rough-sawn.