Sawn Fir Lumber 2x4 Studs
Kiln-dried sawn fir lumber measuring 2 inches by 4 inches by 8 feet, planed and end-jointed for structural framing. Classified under HTS 4407.12.00.59 as sawn coniferous wood of fir (Abies spp.), thickness exceeding 6mm, not chemically treated. Used primarily in residential construction for walls and roofs.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from pine species
Pine (Pinus spp.) sawn lumber classifies under tropical coniferous heading 4407.11
If chemically treated with preservatives
Treated coniferous wood moves to Chapter 44 heading 4408 for dark red meranti and similar
If further finger-jointed into assemblies
Assembled wooden beams and joists exceed simple sawn lumber classification
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain ISPM 15 compliant fumigation certificate if kiln-dried; verify species documentation to confirm Abies spp.; avoid misclassification as hemlock which falls under different subheading
Related Products under HTS 4407.12.00.59
Planed Spruce Planks 1x6
Sanded and planed spruce (Picea spp.) boards measuring 1 inch by 6 inches, sawn lengthwise with thickness over 6mm, untreated. Falls under HTS 4407.12.00.59 as 'other' fir/spruce sawn wood not specifically categorized elsewhere. Ideal for siding, paneling, and furniture components.
End-Jointed Fir Beam 4x8
Structural fir beam 4x8 inches, end-jointed for length extension, sawn and sanded with thickness exceeding 6mm, no chemical treatment. HTS 4407.12.00.59 covers this as 'other' untreated fir sawn lumber. Used in timber framing and heavy construction.
Sliced Fir Veneer Backing Sheets
Thin sliced fir sheets over 6mm thick used as backing for laminated panels, sawn lengthwise and sanded. Classifies in HTS 4407.12.00.59 as other untreated fir wood products exceeding 6mm thickness. Common in furniture and cabinetry manufacturing.
Nordic Spruce Framing Lumber
Sawn Picea abies spruce lumber in standard framing dimensions (2x6, 2x8), planed all round, kiln-dried to 12% MC. HTS 4407.12.00.59 applies to this untreated spruce sawn wood over 6mm thick, 'other' category. Popular for Scandinavian construction imports.
Fir Scaffold Planks 2x10
Heavy-duty sawn fir planks 2x10x12 feet for scaffolding platforms, sanded surface, untreated. Classified HTS 4407.12.00.59 as other fir sawn lumber exceeding 6mm thickness. Meets OSHA scaffold grade requirements.
Spruce Cabinet Back Panels
Sliced and sanded spruce panels over 6mm thick for cabinetry backs, sawn lengthwise. HTS 4407.12.00.59 covers these as untreated spruce sawn wood products. Provides structural support in furniture assembly.