Planed Spruce Planks 1x6
Sanded and planed spruce (Picea spp.) boards measuring 1 inch by 6 inches, sawn lengthwise with thickness over 6mm, untreated. Falls under HTS 4407.12.00.59 as 'other' fir/spruce sawn wood not specifically categorized elsewhere. Ideal for siding, paneling, and furniture components.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from S-P-F mixed stands
Spruce-pine-fir mixed origin lumber uses specific S-P-F subheading per chapter notes
If processed into continuously shaped profiles
Profiled wood like tongue-and-groove boards moves to heading 4409
If laminated into plywood panels
Laminated coniferous wood classifies under plywood heading 4412
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide detailed grading certificates (e.g
• NHLA standards); ensure moisture content documentation under 19%; check for spalting or defects that might require different statistical suffix
Related Products under HTS 4407.12.00.59
Sawn Fir Lumber 2x4 Studs
Kiln-dried sawn fir lumber measuring 2 inches by 4 inches by 8 feet, planed and end-jointed for structural framing. Classified under HTS 4407.12.00.59 as sawn coniferous wood of fir (Abies spp.), thickness exceeding 6mm, not chemically treated. Used primarily in residential construction for walls and roofs.
End-Jointed Fir Beam 4x8
Structural fir beam 4x8 inches, end-jointed for length extension, sawn and sanded with thickness exceeding 6mm, no chemical treatment. HTS 4407.12.00.59 covers this as 'other' untreated fir sawn lumber. Used in timber framing and heavy construction.
Sliced Fir Veneer Backing Sheets
Thin sliced fir sheets over 6mm thick used as backing for laminated panels, sawn lengthwise and sanded. Classifies in HTS 4407.12.00.59 as other untreated fir wood products exceeding 6mm thickness. Common in furniture and cabinetry manufacturing.
Nordic Spruce Framing Lumber
Sawn Picea abies spruce lumber in standard framing dimensions (2x6, 2x8), planed all round, kiln-dried to 12% MC. HTS 4407.12.00.59 applies to this untreated spruce sawn wood over 6mm thick, 'other' category. Popular for Scandinavian construction imports.
Fir Scaffold Planks 2x10
Heavy-duty sawn fir planks 2x10x12 feet for scaffolding platforms, sanded surface, untreated. Classified HTS 4407.12.00.59 as other fir sawn lumber exceeding 6mm thickness. Meets OSHA scaffold grade requirements.
Spruce Cabinet Back Panels
Sliced and sanded spruce panels over 6mm thick for cabinetry backs, sawn lengthwise. HTS 4407.12.00.59 covers these as untreated spruce sawn wood products. Provides structural support in furniture assembly.