Sliced Spruce Framing Timber
Lengthwise sliced spruce timber for construction framing, 50 mm thick x 150 mm wide x 3 meters, untreated rough cut. HTS 4407.12.0020 covers this as 'other' non-S-P-F spruce sawn lengthwise exceeding 6 mm, not further processed.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from mixed spruce-pine-fir stands
S-P-F mixed coniferous wood uses dedicated subheading per official chapter notes.
If in wood chips rather than sawn boards
Chips from spruce processing fall under fuel wood or wood waste headings.
If shaped for specific builders' carpentry like trusses
Pre-shaped for assembly becomes joinery products outside sawn lumber.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Comply with Lacey Act by submitting import declaration with harvest location and species verification
• Label bundles clearly with 'spruce (Picea spp.)' to prevent confusion with pine or S-P-F mixes
• Check for end-jointing; any finger-joints disqualify from this untreated 'other spruce' subheading
Related Products under HTS 4407.12.00.20
Sawn Spruce Lumber 2x4
Rough-sawn spruce (Picea spp.) lumber measuring 2 inches by 4 inches by 8 feet, sliced lengthwise with thickness exceeding 6 mm, not planed, sanded, or end-jointed, and untreated. Classified under HTS 4407.12.0020 as 'other' spruce wood sawn or chipped lengthwise from coniferous spruce species, meeting the criteria for untreated, non-furniture grade lumber.
Peeled Spruce Veneer Sheets
Thin spruce wood sheets peeled lengthwise, thickness 8 mm, untreated and not end-jointed, used for panel overlay. Falls under HTS 4407.12.0020 as 'other' sawn or peeled coniferous spruce exceeding 6 mm thickness, distinct from thinner veneer in Chapter 44 headings.
Rough Sawn Abies Fir Planks
Rough sawn planks from Abies fir species, 25 mm thick for flooring underlay, lengthwise cut and untreated. Although under spruce/fir heading, classified as 'other spruce' per hierarchy for non-standard dimensions, thickness >6 mm.
Spruce Sawn Decking Boards
Lengthwise sawn spruce decking boards, 38 mm thick x 140 mm wide, rough untreated for outdoor use. HTS 4407.12.0020 as 'other' spruce exceeding 6 mm, not end-jointed or surfaced.
Picea Sliced Pallet Stock
Sliced Picea spruce stock for pallet manufacturing, 20 mm thick rough sawn, untreated. Fits HTS 4407.12.0020 for 'other' spruce sawn lengthwise >6 mm, prior to pallet assembly.
Untreated Spruce Beam Blanks
Rough sawn spruce beam blanks 100 mm x 200 mm for structural beams, lengthwise sliced >6 mm thick, no end joints. HTS 4407.12.0020 'other spruce' untreated coniferous lumber.