Peeled Spruce Veneer Sheets
Thin spruce wood sheets peeled lengthwise, thickness 8 mm, untreated and not end-jointed, used for panel overlay. Falls under HTS 4407.12.0020 as 'other' sawn or peeled coniferous spruce exceeding 6 mm thickness, distinct from thinner veneer in Chapter 44 headings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If thickness ≤6 mm after processing
Sheets ≤6 mm thick are classified as veneer regardless of production method.
If mixed hemlock-fir origin labeled 'Hem-fir'
Mixed Western hemlock-fir stands use specific subheading per Chapter 44 notes.
If plywood laminated from these sheets
Laminated into plywood panels shifts to Chapter 44 plywood headings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide milling certificates specifying peeling method and confirming no chemical treatments applied
• Measure thickness precisely post-import; if averaged below 6 mm, risks reclassification to 4408 veneer
• Avoid bundling with adhesives; pure wood state required to stay in sawn/peeled category
Related Products under HTS 4407.12.00.20
Sawn Spruce Lumber 2x4
Rough-sawn spruce (Picea spp.) lumber measuring 2 inches by 4 inches by 8 feet, sliced lengthwise with thickness exceeding 6 mm, not planed, sanded, or end-jointed, and untreated. Classified under HTS 4407.12.0020 as 'other' spruce wood sawn or chipped lengthwise from coniferous spruce species, meeting the criteria for untreated, non-furniture grade lumber.
Sliced Spruce Framing Timber
Lengthwise sliced spruce timber for construction framing, 50 mm thick x 150 mm wide x 3 meters, untreated rough cut. HTS 4407.12.0020 covers this as 'other' non-S-P-F spruce sawn lengthwise exceeding 6 mm, not further processed.
Rough Sawn Abies Fir Planks
Rough sawn planks from Abies fir species, 25 mm thick for flooring underlay, lengthwise cut and untreated. Although under spruce/fir heading, classified as 'other spruce' per hierarchy for non-standard dimensions, thickness >6 mm.
Spruce Sawn Decking Boards
Lengthwise sawn spruce decking boards, 38 mm thick x 140 mm wide, rough untreated for outdoor use. HTS 4407.12.0020 as 'other' spruce exceeding 6 mm, not end-jointed or surfaced.
Picea Sliced Pallet Stock
Sliced Picea spruce stock for pallet manufacturing, 20 mm thick rough sawn, untreated. Fits HTS 4407.12.0020 for 'other' spruce sawn lengthwise >6 mm, prior to pallet assembly.
Untreated Spruce Beam Blanks
Rough sawn spruce beam blanks 100 mm x 200 mm for structural beams, lengthwise sliced >6 mm thick, no end joints. HTS 4407.12.0020 'other spruce' untreated coniferous lumber.