Rough Sitka Spruce Decking 5/4x6
5/4 inch by 6 inch rough Sitka spruce decking boards, actual thickness >6 mm, untreated Picea sitchensis sawn wood. HTS 4407.12.0017 for rough spruce coniferous lumber.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If S-P-F graded mix
Per note, mixed spruce-pine-fir stands classified as S-P-F regardless of exact mix.
If OSB panels
Oriented strand board from strands under particle board heading.
If toothpicks produced
Manufactured into small wood articles like toothpicks under 4421.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify 'rough' in commercial invoice; check for natural defects allowance; sustainable forestry certs (FSC) enhance approval
Related Products under HTS 4407.12.00.17
Rough Sitka Spruce Lumber 2x4
Unplaned Sitka spruce (Picea sitchensis) lumber measuring 2 inches by 4 inches in cross-section and typically 8-16 feet long, sawn lengthwise with thickness exceeding 6 mm. Classified under HTS 4407.12.0017 as rough, coniferous wood of spruce species, not treated, specifically Sitka spruce. Used primarily for framing in construction due to its strength and availability in Pacific Northwest regions.
Rough Sitka Spruce 1x6 Boards
Rough-sawn Sitka spruce boards nominally 1 inch thick by 6 inches wide, exceeding 6 mm actual thickness, derived from Picea sitchensis trees. Fits HTS 4407.12.0017 as untreated, rough coniferous spruce lumber, ideal for sheathing or subflooring in building projects.
Rough Sitka Spruce Timbers 6x8
Large rough-cut Sitka spruce timbers at 6x8 inch dimensions, sawn lengthwise with thickness over 6 mm, untreated. HTS 4407.12.0017 applies to this pure Sitka spruce (Picea sitchensis) rough lumber, commonly used in heavy construction like bridges or wharves.
Rough Sitka Spruce 4x4 Posts
Square rough-sawn Sitka spruce posts, 4x4 inches, thickness exceeding 6 mm, from Picea sitchensis, untreated. Classified in HTS 4407.12.0017 as rough coniferous spruce lumber, suited for fencing or structural posts.
Rough Sitka Spruce Planks 2x12
Wide rough Sitka spruce planks 2 inches thick by 12 inches wide, sawn lengthwise, over 6 mm thick, untreated Picea sitchensis. HTS 4407.12.0017 covers this rough lumber for applications like decking or beams.
Rough Sitka Spruce Beam Stock 8x12
Heavy rough-sawn beam stock from Sitka spruce, 8x12 inch section, thickness >6 mm, untreated. Under HTS 4407.12.0017 as rough Picea sitchensis coniferous wood, for structural beams in marine or heavy timber construction.