Rough Sitka Spruce Timbers 6x8
Large rough-cut Sitka spruce timbers at 6x8 inch dimensions, sawn lengthwise with thickness over 6 mm, untreated. HTS 4407.12.0017 applies to this pure Sitka spruce (Picea sitchensis) rough lumber, commonly used in heavy construction like bridges or wharves.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If chemically treated
Any heat or chemical treatment excludes from 'not treated' rough category.
If continuity dried
Drying processes like kiln-drying classify under continuous action wood heading.
If plywood manufactured
Layered into plywood panels shifts to heading 4412 for densified or laminated wood.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Conduct species-specific DNA testing if challenged on Sitka identification; document chain-of-custody from Pacific forests; avoid bundling with treated wood to prevent contamination claims
Related Products under HTS 4407.12.00.17
Rough Sitka Spruce Lumber 2x4
Unplaned Sitka spruce (Picea sitchensis) lumber measuring 2 inches by 4 inches in cross-section and typically 8-16 feet long, sawn lengthwise with thickness exceeding 6 mm. Classified under HTS 4407.12.0017 as rough, coniferous wood of spruce species, not treated, specifically Sitka spruce. Used primarily for framing in construction due to its strength and availability in Pacific Northwest regions.
Rough Sitka Spruce 1x6 Boards
Rough-sawn Sitka spruce boards nominally 1 inch thick by 6 inches wide, exceeding 6 mm actual thickness, derived from Picea sitchensis trees. Fits HTS 4407.12.0017 as untreated, rough coniferous spruce lumber, ideal for sheathing or subflooring in building projects.
Rough Sitka Spruce 4x4 Posts
Square rough-sawn Sitka spruce posts, 4x4 inches, thickness exceeding 6 mm, from Picea sitchensis, untreated. Classified in HTS 4407.12.0017 as rough coniferous spruce lumber, suited for fencing or structural posts.
Rough Sitka Spruce Planks 2x12
Wide rough Sitka spruce planks 2 inches thick by 12 inches wide, sawn lengthwise, over 6 mm thick, untreated Picea sitchensis. HTS 4407.12.0017 covers this rough lumber for applications like decking or beams.
Rough Sitka Spruce Beam Stock 8x12
Heavy rough-sawn beam stock from Sitka spruce, 8x12 inch section, thickness >6 mm, untreated. Under HTS 4407.12.0017 as rough Picea sitchensis coniferous wood, for structural beams in marine or heavy timber construction.
Rough Sitka Spruce Siding Boards 1x8
Rough 1x8 Sitka spruce boards for siding, sawn >6 mm thick from Picea sitchensis, untreated. HTS 4407.12.0017 designates this as rough coniferous spruce lumber prior to any surfacing.