Finger-Jointed Spruce Trim Boards 1x6
1x6 spruce trim boards, finger-jointed, sawn lengthwise, surfaced >6 mm thick for interior trim. Fits 4407.12.00.01 spruce finger-jointed category.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If fiberboard density 0.5-0.8 g/cm³
Medium density fiberboard from wood fibers.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm flatness for trim use; no tongue/groove to stay sawn; label end-use as trim lumber
Related Products under HTS 4407.12.00.01
Finger-Jointed Spruce Lumber 2x4
Dimensional lumber measuring 2 inches by 4 inches, made from spruce (Picea spp.) wood that has been sawn lengthwise, finger-jointed for end strength, and typically planed or sanded. Thickness exceeds 6 mm, classified under 4407.12.00.01 due to its coniferous spruce origin and specific finger-jointing process.
Finger-Jointed Fir Stud 2x6
Construction-grade studs of fir (Abies spp.), finger-jointed for seamless length extension, sawn to 2x6 dimensions with thickness over 6 mm, often kiln-dried and planed. Falls under HTS 4407.12.00.01 as coniferous fir wood specifically finger-jointed.
Finger-Jointed Spruce Framing Lumber 4x4
Square 4x4 posts from spruce wood, lengthwise sawn, finger-jointed, planed smooth with thickness >6 mm for structural framing. Classified in 4407.12.00.01 for its coniferous spruce composition and finger-joint construction.
Kiln-Dried Finger-Jointed Fir Lumber 2x8
Kiln-dried 2x8 fir boards, finger-jointed from Abies spp., sawn lengthwise, sanded, exceeding 6 mm thickness for joist applications. HTS 4407.12.00.01 due to coniferous fir and finger-jointing.
Finger-Jointed Spruce S4S Lumber 2x10
S4S (surfaced four sides) 2x10 spruce lumber, finger-jointed Picea spp., sawn/planed over 6 mm thick for roof rafters. Fits 4407.12.00.01 as finger-jointed coniferous spruce.
Finger-Jointed Fir Beam Stock 6x8
Heavy-duty 6x8 fir beam stock from Abies, finger-jointed, sawn lengthwise, planed, >6 mm thick for structural beams. Under HTS 4407.12.00.01 for fir finger-jointed lumber.