Finger-Jointed Fir Stud 2x6
Construction-grade studs of fir (Abies spp.), finger-jointed for seamless length extension, sawn to 2x6 dimensions with thickness over 6 mm, often kiln-dried and planed. Falls under HTS 4407.12.00.01 as coniferous fir wood specifically finger-jointed.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from S-P-F mixed spruce-pine-fir stands
Mixed species stands qualify as S-P-F under subheading 4407.13, not pure fir/spruce.
If density exceeds 500 kg/m³ and used for plywood
Densified or chemically treated coniferous wood shifts to heading 4412 for modified properties.
If cut into specific lengths for retail pallet use
Processed into pallet components or similar articles under other wooden manufactures.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Provide phytosanitary certificate proving heat treatment; label clearly as finger-jointed fir (Abies); watch for knot size limits per US building codes during grading
Related Products under HTS 4407.12.00.01
Finger-Jointed Spruce Lumber 2x4
Dimensional lumber measuring 2 inches by 4 inches, made from spruce (Picea spp.) wood that has been sawn lengthwise, finger-jointed for end strength, and typically planed or sanded. Thickness exceeds 6 mm, classified under 4407.12.00.01 due to its coniferous spruce origin and specific finger-jointing process.
Finger-Jointed Spruce Framing Lumber 4x4
Square 4x4 posts from spruce wood, lengthwise sawn, finger-jointed, planed smooth with thickness >6 mm for structural framing. Classified in 4407.12.00.01 for its coniferous spruce composition and finger-joint construction.
Kiln-Dried Finger-Jointed Fir Lumber 2x8
Kiln-dried 2x8 fir boards, finger-jointed from Abies spp., sawn lengthwise, sanded, exceeding 6 mm thickness for joist applications. HTS 4407.12.00.01 due to coniferous fir and finger-jointing.
Finger-Jointed Spruce S4S Lumber 2x10
S4S (surfaced four sides) 2x10 spruce lumber, finger-jointed Picea spp., sawn/planed over 6 mm thick for roof rafters. Fits 4407.12.00.01 as finger-jointed coniferous spruce.
Finger-Jointed Fir Beam Stock 6x8
Heavy-duty 6x8 fir beam stock from Abies, finger-jointed, sawn lengthwise, planed, >6 mm thick for structural beams. Under HTS 4407.12.00.01 for fir finger-jointed lumber.
Finger-Jointed Spruce Joist Lumber 2x12
2x12 spruce joists, finger-jointed Picea, sawn/planed/sanded >6 mm for floor joists. Classified 4407.12.00.01 as coniferous spruce finger-jointed.