Ponderosa Pine Decking
Ponderosa pine (Pinus ponderosa) decking boards, 5/4 x 6 inch, planed and sanded, sawn lengthwise. Classified in 4407.11.00 as pine coniferous wood over 6 mm thick. Used for outdoor decking and siding applications.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If tropical non-coniferous wood
Tropical hardwood decking falls under 4407.29, higher duties than coniferous pine.
If layered into plywood decking
Multiple pine plies laminated together become plywood under heading 4412.
If imported as wood in the rough
Unplaned pine logs or rough wood <6mm processing go to heading 4403.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure pressure-treatment compatibility certification; declare board footage accurately for valuation; separate from finished decking components to avoid 4418 classification
Related Products under HTS 4407.11.00
Radiata Pine Lumber 2x4
Sawn radiata pine (Pinus radiata) boards measuring 2 inches by 4 inches by 8 feet, planed and end-jointed for structural use. Classified under HTS 4407.11.00 as coniferous pine wood sawn lengthwise with thickness exceeding 6 mm. Commonly used in construction framing.
Scots Pine S4S Boards
Scots pine (Pinus sylvestris) lumber surfaced four sides (S4S), 1x6 inch profile, sliced lengthwise and sanded. Falls under 4407.11.00 for pine sawn or chipped coniferous wood exceeding 6 mm thickness. Ideal for interior paneling and furniture.
Loblolly Pine Studs
Loblolly pine (Pinus taeda) 2x4 studs, sawn lengthwise, end-jointed, and kiln-dried for framing. HTS 4407.11.00 covers this coniferous pine lumber thicker than 6 mm. Standard for residential construction in the US market.
Slash Pine Beams
Slash pine (Pinus elliottii) structural beams, 4x8 inch cross-section, sawn, planed, and end-jointed. HTS 4407.11.00 for pine sawn lumber exceeding 6 mm thickness. Engineered for heavy construction loads.
Pine Sawn Finger-Jointed Lumber
Generic Pinus spp. pine sawn boards, finger-jointed for length, planed smooth, 2x6 dimension. Under 4407.11.00 as coniferous pine wood sawn lengthwise over 6 mm. Versatile for trim and framing.
Southern Yellow Pine 2x6
Southern yellow pine (Pinus spp. mixture) 2x6 joists, sawn lengthwise, kiln-dried to 19% moisture. HTS 4407.11.00 classification for pine coniferous lumber thicker than 6 mm. Primary for floor joists.