Pine Sawn Finger-Jointed Lumber
Generic Pinus spp. pine sawn boards, finger-jointed for length, planed smooth, 2x6 dimension. Under 4407.11.00 as coniferous pine wood sawn lengthwise over 6 mm. Versatile for trim and framing.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If posts/poles >6m length
Longer pine posts for utility poles have dedicated subheading 4418.60.
If processed into wood pellets
Pine wood waste compressed into ≤25mm diameter pellets becomes fuel under 4401.31.
If density ≤0.5 g/cm³ and shaped
Low-density shaped pine wood products like moldings fall under heading 4413.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document finger-joint strength certification; ensure end-jointing doesn't alter thickness classification; label with exact pine species origin
Related Products under HTS 4407.11.00
Radiata Pine Lumber 2x4
Sawn radiata pine (Pinus radiata) boards measuring 2 inches by 4 inches by 8 feet, planed and end-jointed for structural use. Classified under HTS 4407.11.00 as coniferous pine wood sawn lengthwise with thickness exceeding 6 mm. Commonly used in construction framing.
Scots Pine S4S Boards
Scots pine (Pinus sylvestris) lumber surfaced four sides (S4S), 1x6 inch profile, sliced lengthwise and sanded. Falls under 4407.11.00 for pine sawn or chipped coniferous wood exceeding 6 mm thickness. Ideal for interior paneling and furniture.
Loblolly Pine Studs
Loblolly pine (Pinus taeda) 2x4 studs, sawn lengthwise, end-jointed, and kiln-dried for framing. HTS 4407.11.00 covers this coniferous pine lumber thicker than 6 mm. Standard for residential construction in the US market.
Ponderosa Pine Decking
Ponderosa pine (Pinus ponderosa) decking boards, 5/4 x 6 inch, planed and sanded, sawn lengthwise. Classified in 4407.11.00 as pine coniferous wood over 6 mm thick. Used for outdoor decking and siding applications.
Slash Pine Beams
Slash pine (Pinus elliottii) structural beams, 4x8 inch cross-section, sawn, planed, and end-jointed. HTS 4407.11.00 for pine sawn lumber exceeding 6 mm thickness. Engineered for heavy construction loads.
Southern Yellow Pine 2x6
Southern yellow pine (Pinus spp. mixture) 2x6 joists, sawn lengthwise, kiln-dried to 19% moisture. HTS 4407.11.00 classification for pine coniferous lumber thicker than 6 mm. Primary for floor joists.