Rough Ponderosa Pine Lumber 2x4
Rough sawn ponderosa pine (Pinus ponderosa) lumber measuring 2 inches by 4 inches by various lengths, exceeding 6mm thickness, chipped lengthwise without planing, sanding, or end-jointing. Classified under HTS 4407.11.0048 as rough, untreated coniferous wood of ponderosa pine for construction and woodworking uses.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sugar pine (Pinus lambertiana)
Sugar pine is separately classified from ponderosa pine within the same 'other' pine category.
If tropical coniferous wood
Non-pine coniferous species like araucaria are classified under tropical headings.
If in wood chips rather than sawn lumber
Wood chips from ponderosa pine processing fall under fuel wood chapter, not sawn lumber.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Verify species certification as Pinus ponderosa via phytosanitary certificate to avoid reclassification
• Declare exact dimensions and 'rough' condition; smooth planed wood shifts to different subheading
• Confirm no chemical treatments (e.g
• preservatives) as treated ponderosa falls under 4407.11.0049
Related Products under HTS 4407.11.00.48
Rough Ponderosa Pine Boards 1x12
Rough cut ponderosa pine boards 1 inch thick by 12 inches wide, sawn lengthwise exceeding 6mm, untreated and not end-jointed. Meets HTS 4407.11.0048 criteria for rough ponderosa pine used in furniture making and paneling.
Rough Ponderosa Pine Timbers 4x6
Heavy rough sawn ponderosa pine timbers 4x6 inches for structural beams, chipped lengthwise, thickness over 6mm, no end-jointing or surfacing. Fits HTS 4407.11.0048 as untreated rough coniferous ponderosa pine.
Rough Ponderosa Pine Planks 2x6
Rough ponderosa pine planks 2 inches by 6 inches, lengthwise sawn exceeding 6mm thickness, untreated for interior millwork. Classified in HTS 4407.11.0048 due to rough condition and specific pine species.
Rough Ponderosa Pine Siding Boards
Rough sawn ponderosa pine boards for exterior siding, thickness exceeding 6mm, chipped lengthwise without planing. HTS 4407.11.0048 applies to this untreated rough coniferous pine lumber.
Rough Ponderosa Pine Studs 2x4x8ft
8-foot rough ponderosa pine studs 2x4 inches for framing, sawn lengthwise over 6mm thick, no end joints. Qualifies for HTS 4407.11.0048 as rough untreated ponderosa pine.
Rough Ponderosa Pine Beam Blanks
Rough sawn ponderosa pine blanks for glued beams, exceeding 6mm thickness, lengthwise chipped, untreated. HTS 4407.11.0048 covers this rough coniferous pine wood.