Rough Ponderosa Pine Beam Blanks
Rough sawn ponderosa pine blanks for glued beams, exceeding 6mm thickness, lengthwise chipped, untreated. HTS 4407.11.0048 covers this rough coniferous pine wood.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If Idaho white pine
Western white pine (Pinus monticola) has separate ponderosa-like suffix.
If densified by pressing
Compressed density ≥0.8g/cm³ moves to densified wood heading.
If dark red meranti veneer sheets
Peeled sheets ≤6mm thick classify as veneers, not sawn lumber.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare intended use carefully; finished beams classify differently
• Moisture content testing may be required for stability claims
• Confirm diameter exceeds veneer specs to stay in sawn lumber
Related Products under HTS 4407.11.00.48
Rough Ponderosa Pine Lumber 2x4
Rough sawn ponderosa pine (Pinus ponderosa) lumber measuring 2 inches by 4 inches by various lengths, exceeding 6mm thickness, chipped lengthwise without planing, sanding, or end-jointing. Classified under HTS 4407.11.0048 as rough, untreated coniferous wood of ponderosa pine for construction and woodworking uses.
Rough Ponderosa Pine Boards 1x12
Rough cut ponderosa pine boards 1 inch thick by 12 inches wide, sawn lengthwise exceeding 6mm, untreated and not end-jointed. Meets HTS 4407.11.0048 criteria for rough ponderosa pine used in furniture making and paneling.
Rough Ponderosa Pine Timbers 4x6
Heavy rough sawn ponderosa pine timbers 4x6 inches for structural beams, chipped lengthwise, thickness over 6mm, no end-jointing or surfacing. Fits HTS 4407.11.0048 as untreated rough coniferous ponderosa pine.
Rough Ponderosa Pine Planks 2x6
Rough ponderosa pine planks 2 inches by 6 inches, lengthwise sawn exceeding 6mm thickness, untreated for interior millwork. Classified in HTS 4407.11.0048 due to rough condition and specific pine species.
Rough Ponderosa Pine Siding Boards
Rough sawn ponderosa pine boards for exterior siding, thickness exceeding 6mm, chipped lengthwise without planing. HTS 4407.11.0048 applies to this untreated rough coniferous pine lumber.
Rough Ponderosa Pine Studs 2x4x8ft
8-foot rough ponderosa pine studs 2x4 inches for framing, sawn lengthwise over 6mm thick, no end joints. Qualifies for HTS 4407.11.0048 as rough untreated ponderosa pine.