Finger-Jointed Scots Pine Construction Lumber
Construction-grade finger-jointed lumber from Pinus sylvestris (Scots pine), sawn for beams and rafters over 6mm. Fits HTS 4407.11.00.01 as coniferous pine with finger-joints.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If tools with wooden handles
Tools with wooden parts excluded from 4417 per chapter note but may apply.
If under 6mm thickness, non-coniferous
Thinner or different wood types use 4409 subheadings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Comply with Eurocode 5 strength grading if from Europe
• Photocopy machine stress grading certificates for customs
• Watch for red heart in Scots pine during inspection
Related Products under HTS 4407.11.00.01
Finger-Jointed Pine Lumber 2x4
Finger-jointed pine lumber measuring 2 inches by 4 inches by various lengths, made from Pinus spp. sawn lengthwise and end-jointed for structural strength. This product falls under HTS 4407.11.00.01 as coniferous pine wood exceeding 6mm thickness with finger-jointing.
Finger-Jointed Pine Studs 2x6
Structural finger-jointed pine studs in 2x6 dimensions from Pinus radiata, sawn lengthwise, planed, and end-jointed for framing applications. Classified under HTS 4407.11.00.01 due to its coniferous pine origin, thickness over 6mm, and finger-jointing.
Finger-Jointed Radiata Pine Boards 1x8
Planed and sanded finger-jointed boards from Pinus radiata, 1 inch thick by 8 inches wide, used for paneling and trim. This sawn coniferous pine lumber over 6mm thick with finger-joints qualifies for HTS 4407.11.00.01.
Finger-Jointed Lodgepole Pine Framing Lumber
Finger-jointed lumber from Pinus contorta (lodgepole pine) for residential framing, sawn to exceed 6mm thickness and end-jointed. Falls under HTS 4407.11.00.01 as specified Pinus spp. coniferous wood.
Finger-Jointed Ponderosa Pine S4S Boards
Surfaced four sides (S4S) finger-jointed boards from Pinus ponderosa, ideal for cabinetry and furniture stock, thickness exceeding 6mm. Classified in HTS 4407.11.00.01 for its pine species and processing.
Finger-Jointed Slash Pine Deck Joists
Finger-jointed joists from Pinus elliottii (slash pine) for outdoor decking, sawn lengthwise over 6mm thick. Meets HTS 4407.11.00.01 criteria for coniferous Pinus sawn wood.