Finger-Jointed Pine Studs 2x6
Structural finger-jointed pine studs in 2x6 dimensions from Pinus radiata, sawn lengthwise, planed, and end-jointed for framing applications. Classified under HTS 4407.11.00.01 due to its coniferous pine origin, thickness over 6mm, and finger-jointing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from spruce rather than pine
Different coniferous species like spruce have separate subheadings in 4407.
If plywood made from these pine veneers
Layered plywood products shift to heading 4412 for plywood classifications.
If in pellet form from processing waste
Wood processing by-products agglomerated into pellets go to Chapter 44 fuel headings.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Ensure end-joint strength meets ASTM D5572 standards for structural use
• Label with grade stamps like SPIB or WWPA for U.S. market acceptance
• Avoid moisture content over 19% to prevent quarantine issues at ports
Related Products under HTS 4407.11.00.01
Finger-Jointed Pine Lumber 2x4
Finger-jointed pine lumber measuring 2 inches by 4 inches by various lengths, made from Pinus spp. sawn lengthwise and end-jointed for structural strength. This product falls under HTS 4407.11.00.01 as coniferous pine wood exceeding 6mm thickness with finger-jointing.
Finger-Jointed Radiata Pine Boards 1x8
Planed and sanded finger-jointed boards from Pinus radiata, 1 inch thick by 8 inches wide, used for paneling and trim. This sawn coniferous pine lumber over 6mm thick with finger-joints qualifies for HTS 4407.11.00.01.
Finger-Jointed Lodgepole Pine Framing Lumber
Finger-jointed lumber from Pinus contorta (lodgepole pine) for residential framing, sawn to exceed 6mm thickness and end-jointed. Falls under HTS 4407.11.00.01 as specified Pinus spp. coniferous wood.
Finger-Jointed Ponderosa Pine S4S Boards
Surfaced four sides (S4S) finger-jointed boards from Pinus ponderosa, ideal for cabinetry and furniture stock, thickness exceeding 6mm. Classified in HTS 4407.11.00.01 for its pine species and processing.
Finger-Jointed Slash Pine Deck Joists
Finger-jointed joists from Pinus elliottii (slash pine) for outdoor decking, sawn lengthwise over 6mm thick. Meets HTS 4407.11.00.01 criteria for coniferous Pinus sawn wood.
Finger-Jointed Monterey Pine Trim Boards
Premium finger-jointed trim boards from Pinus radiata (Monterey pine), sanded and planed for interior molding. HTS 4407.11.00.01 applies to this thick sawn Pinus coniferous lumber.