Port Orford Cedar Rough Timber
Roughly squared Port Orford cedar (Chamaecyparis lawsoniana) timber exceeding 15 cm cross-section, harvested from Oregon coastal ranges. Classifies precisely under HTS 4403.25.01.57 for other coniferous cedar logs in the rough. Prized for durability in greenhouse construction and fine furniture.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If under 15 cm cross-section
Smaller dimension coniferous rough wood uses separate subheading regardless of species.
If coniferous veneer sheets
Cedar processed into thin sheets (>6mm) for plywood classifies as veneer.
If further worked into articles
Rough timber becomes 'other articles of wood' once shaped beyond squaring.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Source from phytophthora-resistant stands; provide health certificates due to root rot disease history
• Measure and document smallest cross-sectional dimension on commercial invoice to confirm 4403.25 applicability
• Avoid bundling with sawn pieces in same shipment to prevent mixed classification challenges
Related Products under HTS 4403.25.01.57
Western Red Cedar Logs
Rough-cut logs from Western red cedar (Thuja plicata) with smallest cross-sectional dimension exceeding 15 cm, sourced from Pacific Northwest forests. Classified under HTS 4403.25.01.57 as 'other cedar' coniferous wood in the rough, not stripped of bark or sapwood, used primarily for lumber production. Meets criteria for large-dimension cedar timber unfit for immediate use without further processing.
Alaska Yellow Cedar Timber
Rough-squared timber from Alaska yellow cedar (Cupressus nootkatensis) with cross-sections over 15 cm, typically bark-on from coastal harvesting. Falls under HTS 4403.25.01.57 as coniferous 'other cedar' logs and timber in the rough state. Ideal for boatbuilding and outdoor applications due to natural rot resistance.
Incense Cedar Rough Logs
Unprocessed logs of incense cedar (Calocedrus decurrens) with minimum 15 cm cross-sectional dimensions, sourced from California Sierra Nevada. HTS 4403.25.01.57 covers this as 'other cedar' coniferous wood in rough form, whether stripped or not. Commonly used for pencil slats and closet lining due to aromatic properties.
Eastern Red Cedar Logs
Rough eastern red cedar (Juniperus virginiana) logs with cross-sections 15 cm or greater, from Appalachian hardwood forests. HTS 4403.25.01.57 applies as coniferous 'other cedar' in the rough, valued for aromatic fence posts and wardrobes. Typically imported bark-on for cost efficiency.
Aromatic Cedar Rough Timber
Rough-cut aromatic cedar timber (Juniperus spp.) with 15+ cm cross-sections, selected for moth-repellent properties in storage chests. Falls under HTS 4403.25.01.57 as other coniferous cedar logs and timber in rough condition. Sustainably harvested from managed southern US stands.