Eastern Red Cedar Logs

Rough eastern red cedar (Juniperus virginiana) logs with cross-sections 15 cm or greater, from Appalachian hardwood forests. HTS 4403.25.01.57 applies as coniferous 'other cedar' in the rough, valued for aromatic fence posts and wardrobes. Typically imported bark-on for cost efficiency.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+35.0%35%
🇲🇽MexicoFree+10.0%10%
🇨🇦CanadaFree+10.0%10%
🇩🇪GermanyFree+10.0%10%
🇯🇵JapanFree+10.0%10%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

4403.25.01Same rate: 35%

If red cedar specifically designated

Some red cedar types have primary statistical reporting separate from 'other cedar'.

4401.32Lower: 10% vs 35%

If processed into briquettes

Cedar sawdust/chips agglomerated into large briquettes become fuel products.

4412.31Lower: 18% vs 35%

If made into plywood

Rough logs destined for plywood production classify based on finished panel form.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Treat for cedar apple rust and twig borers per APHIS guidelines before ocean shipment

Label shipments clearly as 'rough cedar logs - not for sawmill use' to maintain classification

Monitor moisture content; excessive wetness may trigger additional fumigation requirements

Related Products under HTS 4403.25.01.57

Western Red Cedar Logs

Rough-cut logs from Western red cedar (Thuja plicata) with smallest cross-sectional dimension exceeding 15 cm, sourced from Pacific Northwest forests. Classified under HTS 4403.25.01.57 as 'other cedar' coniferous wood in the rough, not stripped of bark or sapwood, used primarily for lumber production. Meets criteria for large-dimension cedar timber unfit for immediate use without further processing.

Alaska Yellow Cedar Timber

Rough-squared timber from Alaska yellow cedar (Cupressus nootkatensis) with cross-sections over 15 cm, typically bark-on from coastal harvesting. Falls under HTS 4403.25.01.57 as coniferous 'other cedar' logs and timber in the rough state. Ideal for boatbuilding and outdoor applications due to natural rot resistance.

Incense Cedar Rough Logs

Unprocessed logs of incense cedar (Calocedrus decurrens) with minimum 15 cm cross-sectional dimensions, sourced from California Sierra Nevada. HTS 4403.25.01.57 covers this as 'other cedar' coniferous wood in rough form, whether stripped or not. Commonly used for pencil slats and closet lining due to aromatic properties.

Port Orford Cedar Rough Timber

Roughly squared Port Orford cedar (Chamaecyparis lawsoniana) timber exceeding 15 cm cross-section, harvested from Oregon coastal ranges. Classifies precisely under HTS 4403.25.01.57 for other coniferous cedar logs in the rough. Prized for durability in greenhouse construction and fine furniture.

Aromatic Cedar Rough Timber

Rough-cut aromatic cedar timber (Juniperus spp.) with 15+ cm cross-sections, selected for moth-repellent properties in storage chests. Falls under HTS 4403.25.01.57 as other coniferous cedar logs and timber in rough condition. Sustainably harvested from managed southern US stands.