LDPE Square Profile Stick
Low-density polyethylene (LDPE) square profile sticks over 1 mm cross-section, used for edging and seals in packaging. Classified under 3916.10.00.00 as profile shapes of ethylene polymers, meeting the 95% monomer threshold without further working.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If in sheet/plate form rather than continuous profile
Flat sheets of ethylene polymers classify in 3920, while extruded profiles with defined shapes stay in 3916.
If imported as parts of plastic processing machinery
End-use as machine components may shift to 8477 for parts of injection molding machines.
If cut to length and packaged for retail as craft sticks
Retail-packaged finished articles move to 3926 other articles, not primary shapes.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include certificates of analysis proving LDPE ethylene polymer purity per Chapter 39 subheading rules
• Document exact cross-sectional dimensions to exceed 1 mm threshold for monofilament/profile classification
• Watch for blending; copolymers below 95% ethylene shift to predominant monomer subheading
Related Products under HTS 3916.10.00.00
HDPE Round Monofilament Rod
A high-density polyethylene (HDPE) monofilament rod with a diameter exceeding 1 mm, used in fishing nets and industrial weaving. It is made from polymers of ethylene where ethylene monomers constitute 95% or more by weight, classifying it under HTS 3916.10.00.00 as monofilament not otherwise worked.
Ethylene Polymer Monofilament Fishing Line Base
Thick HDPE monofilament exceeding 1 mm diameter, serving as base material for heavy-duty fishing lines and nets. Falls under HTS 3916.10.00.00 due to ethylene polymer composition and lack of further processing beyond surface working.
PE Rod for 3D Printer Filament Precursor
Polyethylene rod stock with cross-section >1 mm, used as precursor for custom 3D printing filaments. Classified in 3916.10.00.00 as unworked rod of ethylene polymers per 95% monomer rule.
HDPE U-Channel Profile Shape
Extruded HDPE U-channel profile exceeding 1 mm thickness, for protective edging in construction. HTS 3916.10.00.00 applies to this surface-worked profile of ethylene polymers.
Ethylene Copolymer Monofilament Broom Bristle Stock
Monofilament of ethylene copolymers (≥95% ethylene units) over 1 mm, for broom bristle manufacturing. Subheading 3916.10.00.00 per note (a)(2) for qualifying copolymers.
PE Flat Strip Profile for Reinforcement
Flat polyethylene strip profiles >1 mm thick, used for reinforcing concrete and geotextiles. As ethylene polymer profiles not otherwise worked, under HTS 3916.10.00.00.