HDPE U-Channel Profile Shape
Extruded HDPE U-channel profile exceeding 1 mm thickness, for protective edging in construction. HTS 3916.10.00.00 applies to this surface-worked profile of ethylene polymers.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If further fabricated into builders' fittings
Mounting/reservoir fittings in 3925 cover worked articles; primary profiles remain 3916.
If artificial gut or sausage casing profiles
Specific end-use profiles for food casings shift to 3917 despite ethylene base.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Measure all cross-sectional dimensions; must all exceed 1 mm for monofilament/profile status
• Distinguish from pipes/hoses in 3917 by solid vs hollow construction
• Provide density specs to confirm HDPE vs LDPE if rate differences apply downstream
Related Products under HTS 3916.10.00.00
HDPE Round Monofilament Rod
A high-density polyethylene (HDPE) monofilament rod with a diameter exceeding 1 mm, used in fishing nets and industrial weaving. It is made from polymers of ethylene where ethylene monomers constitute 95% or more by weight, classifying it under HTS 3916.10.00.00 as monofilament not otherwise worked.
LDPE Square Profile Stick
Low-density polyethylene (LDPE) square profile sticks over 1 mm cross-section, used for edging and seals in packaging. Classified under 3916.10.00.00 as profile shapes of ethylene polymers, meeting the 95% monomer threshold without further working.
Ethylene Polymer Monofilament Fishing Line Base
Thick HDPE monofilament exceeding 1 mm diameter, serving as base material for heavy-duty fishing lines and nets. Falls under HTS 3916.10.00.00 due to ethylene polymer composition and lack of further processing beyond surface working.
PE Rod for 3D Printer Filament Precursor
Polyethylene rod stock with cross-section >1 mm, used as precursor for custom 3D printing filaments. Classified in 3916.10.00.00 as unworked rod of ethylene polymers per 95% monomer rule.
Ethylene Copolymer Monofilament Broom Bristle Stock
Monofilament of ethylene copolymers (≥95% ethylene units) over 1 mm, for broom bristle manufacturing. Subheading 3916.10.00.00 per note (a)(2) for qualifying copolymers.
PE Flat Strip Profile for Reinforcement
Flat polyethylene strip profiles >1 mm thick, used for reinforcing concrete and geotextiles. As ethylene polymer profiles not otherwise worked, under HTS 3916.10.00.00.