Aerospace-Grade Elastomeric Polysulfide Sealant Resin
Aerospace-Grade Elastomeric Polysulfide Sealant Resin is a primary form polymer for fuel tank coatings. HTS 3911.90.10.00 covers its elastomeric nature under polysulfides, compliant with 95% monomer rule. High chemical resistance suits aviation demands.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If flexible tubing made from it
Articles like tubes from these polymers go to specific 3917 headings.
If tubes/pipes without fittings
Rubber tubes from elastomers shift to Chapter 40 if applicable.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Comply with REACH/ TSCA for aerospace chemicals; provide safety data sheets
• Confirm dimensions don't trigger 3921 Free (B) note if in sheet form
Related Products under HTS 3911.90.10.00
Mercaptan Polysulfide Elastomer Base M-100
Mercaptan Polysulfide Elastomer Base M-100 is a low-viscosity primary resin for two-part sealants. Classified in HTS 3911.90.10.00 for elastomeric polysulfides, with thiol groups enabling crosslinking. Primary form ensures it stays in heading 3911, not as finished rubber.
Low-Tg Elastomeric Polysulfone Pellets
Low-Tg Elastomeric Polysulfone Pellets offer glass transition below -40°C for cold-flexible applications. Under HTS 3911.90.10.00 as primary elastomeric polysulfones per Chapter notes. Pellet form confirms primary state.
Crosslinkable Polysulfide Elastomer Prepolymer
Crosslinkable Polysulfide Elastomer Prepolymer for potting compounds, elastomeric per 3911.90.10.00. Primary liquid form with pendant thiols.
UV-Resistant Elastomeric Polysulfide Resin
UV-Resistant Elastomeric Polysulfide Resin for outdoor sealants, classified 3911.90.10.00.
High-Sulfur Elastomeric Polysulfone Gum
High-Sulfur Elastomeric Polysulfone Gum base for specialty rubbers, HTS 3911.90.10.00.
Liquid Polysulfide Polymer LS-50
Liquid Polysulfide Polymer LS-50 is an elastomeric polysulfide prepolymer in primary form used as a base for sealants and adhesives. It falls under HTS 3911.90.10.00 as an elastomeric product specified in note 3 to Chapter 39, in primary forms (not mixed with other substances). Its high elasticity and sulfur linkages distinguish it from other polymers.