Mercaptan Polysulfide Elastomer Base M-100
Mercaptan Polysulfide Elastomer Base M-100 is a low-viscosity primary resin for two-part sealants. Classified in HTS 3911.90.10.00 for elastomeric polysulfides, with thiol groups enabling crosslinking. Primary form ensures it stays in heading 3911, not as finished rubber.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-mixed as organic composite solvent
Pre-mixed chemical preparations with polymers go to 3814, not primary polymers.
If adhesive-prepared form
Adhesives incorporating these polymers are finished products in 3506.
If ethylene-vinyl acetate copolymer variant
Specific copolymers named in 3901.30 take precedence if ≥95% named units.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Require supplier declaration of no fittings/attachments to maintain heading 3917 exclusion note applicability
• Test for polymer purity; impurities >5% may reclassify per predominant monomer rule
• Avoid bulk packaging confusion with retail sets that could invoke 3924 household exclusions
Related Products under HTS 3911.90.10.00
Low-Tg Elastomeric Polysulfone Pellets
Low-Tg Elastomeric Polysulfone Pellets offer glass transition below -40°C for cold-flexible applications. Under HTS 3911.90.10.00 as primary elastomeric polysulfones per Chapter notes. Pellet form confirms primary state.
Crosslinkable Polysulfide Elastomer Prepolymer
Crosslinkable Polysulfide Elastomer Prepolymer for potting compounds, elastomeric per 3911.90.10.00. Primary liquid form with pendant thiols.
UV-Resistant Elastomeric Polysulfide Resin
UV-Resistant Elastomeric Polysulfide Resin for outdoor sealants, classified 3911.90.10.00.
High-Sulfur Elastomeric Polysulfone Gum
High-Sulfur Elastomeric Polysulfone Gum base for specialty rubbers, HTS 3911.90.10.00.
Liquid Polysulfide Polymer LS-50
Liquid Polysulfide Polymer LS-50 is an elastomeric polysulfide prepolymer in primary form used as a base for sealants and adhesives. It falls under HTS 3911.90.10.00 as an elastomeric product specified in note 3 to Chapter 39, in primary forms (not mixed with other substances). Its high elasticity and sulfur linkages distinguish it from other polymers.
Thiol-Terminated Polysulfide Prepolymer LP-3
Thiol-Terminated Polysulfide Prepolymer LP-3 is a viscous, elastomeric liquid used in aerospace sealants and coatings. Classified under HTS 3911.90.10.00 for elastomeric polysulfides in primary forms per subheading rules on polymer content. Its mercaptan-terminated structure provides elasticity for high-performance applications.