Synthetic Draw Oil for Wire
High-performance lubricant for wire drawing operations reducing die wear with minimal petroleum base. Falls under HTS 3403.19.50.00 as other lubricating preparation for metalworking.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 5.8% | +35.0% | 40.8% |
| 🇲🇽Mexico | 5.8% | +10.0% | 15.8% |
| 🇨🇦Canada | 5.8% | +10.0% | 15.8% |
| 🇩🇪Germany | 5.8% | +10.0% | 15.8% |
| 🇯🇵Japan | 5.8% | +10.0% | 15.8% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If metal polishes or scouring function emphasized
Polishing pastes and metal cleaners classified in 3405.
If chemical additive preparation for industrial use
Prepared chemical additives may fall under residual heading 3824.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide die wear reduction test data as proof of lubricating efficacy
• Specify boundary lubrication properties distinguishing from coolants
• Check for anti-dumping duties on wire products from specific countries
Related Products under HTS 3403.19.50.00
Synthetic Metal Cutting Fluid
A water-based synthetic lubricant used in machining operations to cool and lubricate metal tools and workpieces. Classified under HTS 3403.19.50.00 because it contains less than 70% petroleum oils and functions as a cutting-oil preparation based on lubricants for industrial metalworking.
Water-Soluble Textile Finishing Oil
An emulsified preparation used for oil or grease treatment of textile yarns during spinning and weaving to reduce friction. Falls under HTS 3403.19.50.00 as it contains petroleum oils below 70% and is specifically for textile material treatment.
Low-Oil Penetrating Rust Preventive
A penetrating anticorrosion preparation for metal parts storage, containing minimal petroleum oils with rust-inhibiting additives. Classified in HTS 3403.19.50.00 for antirust preparations based on lubricants with <70% petroleum content.
Semi-Synthetic Chain Bar Lubricant
A lubricant for chainsaws and industrial chains with synthetic base and <70% petroleum oils for high-temperature performance. HTS 3403.19.50.00 applies to such lubricating preparations not predominantly petroleum-based.
Leather Processing Emulsion
An oil-in-water emulsion for softening and lubricating leather during tanning and finishing processes. Fits HTS 3403.19.50.00 as a preparation for grease treatment of leather materials with limited petroleum oils.
Nut and Bolt Release Spray
Aerosol spray with penetrating lubricants and <70% petroleum for freeing rusted fasteners. Classified under HTS 3403.19.50.00 as bolt/nut release preparation based on lubricants.