Low-Oil Penetrating Rust Preventive
A penetrating anticorrosion preparation for metal parts storage, containing minimal petroleum oils with rust-inhibiting additives. Classified in HTS 3403.19.50.00 for antirust preparations based on lubricants with <70% petroleum content.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 5.8% | +35.0% | 40.8% |
| 🇲🇽Mexico | 5.8% | +10.0% | 15.8% |
| 🇨🇦Canada | 5.8% | +10.0% | 15.8% |
| 🇩🇪Germany | 5.8% | +10.0% | 15.8% |
| 🇯🇵Japan | 5.8% | +10.0% | 15.8% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If primarily paint or varnish-based corrosion protection
Paints and varnishes with anticorrosive properties are classified in Chapter 32.
If marketed specifically as bolt/nut release preparation
Release agent function has a dedicated subheading separate from general antirust.
If chemical anti-knock or antioxidant additives predominate
Certain chemical finishing agents for oils are in heading 3819, not basic lubricants.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit corrosion test results demonstrating antirust efficacy as primary function
• Avoid bulk packaging that could suggest industrial oil under Chapter 27
• Include flash point and viscosity specs to confirm prepared lubricant status
Related Products under HTS 3403.19.50.00
Synthetic Metal Cutting Fluid
A water-based synthetic lubricant used in machining operations to cool and lubricate metal tools and workpieces. Classified under HTS 3403.19.50.00 because it contains less than 70% petroleum oils and functions as a cutting-oil preparation based on lubricants for industrial metalworking.
Water-Soluble Textile Finishing Oil
An emulsified preparation used for oil or grease treatment of textile yarns during spinning and weaving to reduce friction. Falls under HTS 3403.19.50.00 as it contains petroleum oils below 70% and is specifically for textile material treatment.
Semi-Synthetic Chain Bar Lubricant
A lubricant for chainsaws and industrial chains with synthetic base and <70% petroleum oils for high-temperature performance. HTS 3403.19.50.00 applies to such lubricating preparations not predominantly petroleum-based.
Leather Processing Emulsion
An oil-in-water emulsion for softening and lubricating leather during tanning and finishing processes. Fits HTS 3403.19.50.00 as a preparation for grease treatment of leather materials with limited petroleum oils.
Nut and Bolt Release Spray
Aerosol spray with penetrating lubricants and <70% petroleum for freeing rusted fasteners. Classified under HTS 3403.19.50.00 as bolt/nut release preparation based on lubricants.
Bio-Based Textile Yarn Lubricant
Plant-derived lubricant with trace petroleum for warp sizing and yarn lubrication in weaving. HTS 3403.19.50.00 covers such textile treatment preparations under the petroleum threshold.