Ethyl Methacrylate with Anti-Dusting Agent
Fine droplet ethyl methacrylate emulsion with 0.1% silica anti-dusting agent for safe handling in powder coating production. Permissible under HTS 2916.14.2010 per Chapter 29 note (g) as identification/safety additive not rendering specific use. Converts to acrylic powder coatings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If >5% anti-dusting agents/solvents
High additive content creates Chapter 38 prepared chemical goods.
If nitrocellulose-compatible formulation
Lacquer-specific additives shift to Chapter 32 paint preparations.
If primary alcohol function dominates
Functional group priority changes classification within Chapter 29.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• 1
• Safety Data Sheet must specify anti-dust agent composition; 2
• Grounded/non-sparking handling equipment required; 3
• Class II Div 1 electrical classification for storage
Related Products under HTS 2916.14.20.10
Ethyl Methacrylate Monomer
Pure ethyl methacrylate (CH2=C(CH3)COOCH2CH3) is a colorless liquid unsaturated acyclic monocarboxylic acid ester used primarily as a monomer in polymerization reactions. It falls under HTS 2916.14.2010 as a specific ester of methacrylic acid, chemically defined per Chapter 29 note (a). Stabilizers may be added for safety and transport without changing classification.
Stabilized Ethyl Methacrylate 99%
Industrial-grade ethyl methacrylate containing 100 ppm hydroquinone monomethyl ether (MEHQ) stabilizer, meeting Chapter 29 note (f) for preservation during transport. Classified under HTS 2916.14.2010 as the primary product remains chemically defined ethyl methacrylate ester. Used in UV-curable coatings and dental resins.
Ethyl Methacrylate for Dental Applications
High-purity ethyl methacrylate (99.5%) packaged in 25kg nitrogen-blanketed drums for dental composite production. Remains under HTS 2916.14.2010 as chemically defined methacrylic acid ester per Chapter 29 scope, despite end-use packaging. Polymerizes into biocompatible resins for fillings.
Technical Grade Ethyl Methacrylate
Ethyl methacrylate with 98% minimum assay, balance ethyl acetate/water, supplied in ISO tank containers for adhesive manufacturing. Qualifies under HTS 2916.14.2010 as principal product meets Chapter 29 chemically defined compound criteria. Common in anaerobic adhesives.
Polymerization-Grade Ethyl Methacrylate
Ultra-low inhibitor ethyl methacrylate (<10 ppm MEHQ) for emulsion polymerization producing acrylic latex paints. HTS 2916.14.2010 classification maintained as pure methacrylic ester per Chapter 29 note (a), with minimal additives allowed by note (f). Key raw material for architectural coatings.
UV-Curable Ethyl Methacrylate
Ethyl methacrylate pre-treated for radiation curing applications in 3D printing resins. Still classified HTS 2916.14.2010 as the base chemically defined ester remains unchanged by UV sensitizers within Chapter 29 note (g) limits. Enables rapid prototyping.