Ferro-Silicon Carbide Grain 24/48 Mesh
Ferro-silicon carbide in granular form with 24/48 mesh size, chemically defined as silicon carbide with iron additives, used as an abrasive and deoxidizer in steel production. It falls under HTS 2849.20.20.00 because it is silicon carbide processed into grains or ground form, meeting the chapter's criteria for carbides whether or not chemically defined. This subheading specifically covers silicon carbides that are ground, pulverized, or refined.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If in crude or lump form
Crude silicon carbide not yet ground or pulverized falls under the crude form subheading in the same silicon carbide heading.
If chemically doped for electronics and cut into wafers or discs
Doped silicon carbide processed into wafers or similar forms for semiconductors is classified as doped materials under heading 3818 per chapter note.
If sintered into millstones or grinding wheels
When formed into finished abrasive articles like grinding wheels, it shifts from chemical compound to manufactured abrasive article in Chapter 68.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify purity and particle size distribution via lab analysis to confirm classification; obtain Material Safety Data Sheets (MSDS) for hazardous material declarations; ensure packaging prevents dust contamination during transport
Related Products under HTS 2849.20.20.00
Silicon Carbide Powder 600 Grit FFP
High-purity silicon carbide powder at 600 grit, black in color, used for precision lapping and polishing in optics and ceramics manufacturing. Classified under HTS 2849.20.20.00 as chemically defined silicon carbide that has been pulverized or refined into fine powder form. This distinguishes it from crude silicon carbide.
Green Silicon Carbide Micronized Powder 1200 Mesh
Green silicon carbide micronized to 1200 mesh, produced via Acheson process with higher purity, ideal for bonded abrasives and refractories. It qualifies for HTS 2849.20.20.00 due to its refined, pulverized state as a chemically defined carbide of silicon. The green color indicates low iron impurities.
Black Silicon Carbide Grain 16/30 Mesh for Steel Deoxidation
Black silicon carbide grains sized 16/30 mesh, used in steelmaking for deoxidation and as a slag conditioner. Falls under HTS 2849.20.20.00 as ground silicon carbide grains, chemically defined per Chapter 28/29 notes. Standard abrasive/metallurgical grade.
Silicon Carbide Fused Powder 325 Mesh Refractory Grade
Fused silicon carbide powder at 325 mesh, designed for high-temperature refractory brick production. Classified in HTS 2849.20.20.00 for its pulverized, refined form as a silicon carbide compound. Chemically defined with consistent SiC composition.
SiC Abrasive Grain 80 Grit Ground
Silicon carbide (SiC) abrasive grains at 80 grit, ground for use in resinoid grinding wheels and coated abrasives. Under HTS 2849.20.20.00 as refined, ground silicon carbide, chemically defined carbide per chapter provisions. Standard black SiC grade.
High Purity SiC Powder for Sintered Ceramics
High purity alpha silicon carbide powder for pressureless sintering into advanced ceramics. HTS 2849.20.20.00 applies to this pulverized, chemically defined silicon carbide refined for technical ceramics. Purity exceeds 99% SiC.