Transformer Waste Oil with PCBs
Waste oil drained from electrical transformers contaminated with polychlorinated biphenyls (PCBs) at concentrations of 50 mg/kg or more. This falls under HTS 2710.91.00.10 as it is a waste oil from petroleum sources exceeding the PCB threshold, requiring special hazardous waste handling. It is generated during decommissioning or maintenance of old electrical equipment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If classified as a residual chemical waste rather than petroleum-based
Waste from chemical processes not primarily petroleum oils may shift to Chapter 38 for residual products.
If imported as part of discarded electrical waste
Electrical waste containing PCBs might be classified under Chapter 85 as scrap of electrical machinery instead of separated oils.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain EPA TSCA import certification prior to shipment; ensure manifests document PCB levels via lab testing
• Use licensed hazardous waste transporters and verify destination facility permits
• Avoid common pitfalls like incomplete concentration reporting leading to CBP holds
Related Products under HTS 2710.91.00.10
Capacitor Drain Oil Contaminated with PCBs
Liquid waste recovered from draining old capacitors that used PCBs as dielectric fluid, with PCB content at or above 50 mg/kg. Classified under 2710.91.00.10 due to its origin as petroleum-derived waste oil meeting the high PCB concentration criterion. Common in recycling operations for legacy electrical components.
Industrial Hydraulic Oil Waste with PCBs
Contaminated hydraulic fluid waste from machinery in facilities where PCBs leached into petroleum-based lubricants, exceeding 50 mg/kg PCB limit. This waste oil is specifically covered by HTS 2710.91.00.10 as petroleum-derived with high PCB content. Typically arises in older manufacturing plants.
Electrical Switchgear Waste Oil PCBs
Waste oil from circuit breakers and switchgear equipment historically using PCBs, tested at 50 mg/kg or higher. Fits HTS 2710.91.00.10 as waste petroleum oil with specified PCB contamination levels. Collected during utility infrastructure upgrades.
Fluorescent Light Ballast Oil Waste with PCBs
Oily residue from dismantling PCB-containing ballasts in fluorescent lighting fixtures, with PCB levels ≥50 mg/kg. This petroleum waste oil is classified under 2710.91.00.10 due to its high contaminant concentration. Prevalent in commercial building retrofits.
Mining Equipment Lube Oil PCB Contaminated
Lubricating oil waste from heavy mining machinery exposed to PCB contaminants, at 50 mg/kg or more. Covered by HTS 2710.91.00.10 as qualifying petroleum waste oil. Generated in legacy mining operations with old electrical systems.
Power Plant Turbine Oil Waste PCBs
Waste turbine oil from power generation facilities with PCB ingress above 50 mg/kg threshold. This fits 2710.91.00.10 as high-PCB petroleum waste oil. Common in coal or older plants during overhauls.