Electrical Switchgear Waste Oil PCBs
Waste oil from circuit breakers and switchgear equipment historically using PCBs, tested at 50 mg/kg or higher. Fits HTS 2710.91.00.10 as waste petroleum oil with specified PCB contamination levels. Collected during utility infrastructure upgrades.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing primarily halogens from PCB breakdown
Halogenated waste not predominantly oils may go to Chapter 38 subheading for halogen mixtures.
If for bitumen-based residues with PCB traces
Petroleum coke or bituminous mixtures classify separately from liquid waste oils.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Comply with Basel Convention for transboundary hazardous waste movement
• Label with DOT hazardous class 9
• Avoid pitfall of bulk shipments without pre-approval
Related Products under HTS 2710.91.00.10
Transformer Waste Oil with PCBs
Waste oil drained from electrical transformers contaminated with polychlorinated biphenyls (PCBs) at concentrations of 50 mg/kg or more. This falls under HTS 2710.91.00.10 as it is a waste oil from petroleum sources exceeding the PCB threshold, requiring special hazardous waste handling. It is generated during decommissioning or maintenance of old electrical equipment.
Capacitor Drain Oil Contaminated with PCBs
Liquid waste recovered from draining old capacitors that used PCBs as dielectric fluid, with PCB content at or above 50 mg/kg. Classified under 2710.91.00.10 due to its origin as petroleum-derived waste oil meeting the high PCB concentration criterion. Common in recycling operations for legacy electrical components.
Industrial Hydraulic Oil Waste with PCBs
Contaminated hydraulic fluid waste from machinery in facilities where PCBs leached into petroleum-based lubricants, exceeding 50 mg/kg PCB limit. This waste oil is specifically covered by HTS 2710.91.00.10 as petroleum-derived with high PCB content. Typically arises in older manufacturing plants.
Fluorescent Light Ballast Oil Waste with PCBs
Oily residue from dismantling PCB-containing ballasts in fluorescent lighting fixtures, with PCB levels ≥50 mg/kg. This petroleum waste oil is classified under 2710.91.00.10 due to its high contaminant concentration. Prevalent in commercial building retrofits.
Mining Equipment Lube Oil PCB Contaminated
Lubricating oil waste from heavy mining machinery exposed to PCB contaminants, at 50 mg/kg or more. Covered by HTS 2710.91.00.10 as qualifying petroleum waste oil. Generated in legacy mining operations with old electrical systems.
Power Plant Turbine Oil Waste PCBs
Waste turbine oil from power generation facilities with PCB ingress above 50 mg/kg threshold. This fits 2710.91.00.10 as high-PCB petroleum waste oil. Common in coal or older plants during overhauls.