Blended High-Sulfur Light Fuel Oil No. 2
Blended distillate fuel oil No. 2 with sulfur exceeding 500 ppm for boiler and burner use. Falls under HTS 2710.19.11.04 as a preparation ≥70% petroleum oils, light viscosity, high API, specifically for fuel Nos. 2/3.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If heavy fuel oils >45 SUS
Blends meeting residual fuel specs classify as heavier oils regardless of sulfur.
If 90%+ distills at 210°C (light oils)
Very light fractions meeting ISO 3405 test go to motor spirit/light oil subheadings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document blend ratios to confirm ≥70% petroleum base; test per ASTM D396 fuel oil standards; declare barrel equivalents (158.98L) accurately
Related Products under HTS 2710.19.11.04
No. 2 Diesel Fuel Oil (High Sulfur)
A middle distillate petroleum oil classified as No. 2 diesel fuel with sulfur content exceeding 500 ppm, derived from refining crude oil or bituminous minerals. It meets the criteria for subheading 2710.19.11.04 due to its API gravity of 25 degrees or more, Saybolt Universal viscosity under 45 seconds at 37.8°C, and use as a light fuel oil for diesel engines. This product is not crude, contains no biodiesel, and is not waste oil.
No. 2-G Diesel Fuel (High Sulfur Grade)
No. 2-G grade diesel oil for off-road and general use, with sulfur over 500 ppm, obtained from bituminous mineral distillation. It qualifies under HTS 2710.19.11.04 as a light fuel oil (Nos. 2 and 3) with the specified API gravity, low viscosity, and high sulfur profile, excluding biodiesel blends.
High Sulfur Marine Diesel Oil (MDO No. 2)
Marine distillate fuel oil equivalent to No. 2 diesel with sulfur content above 500 ppm, used in auxiliary engines. This product fits HTS 2710.19.11.04 precisely as a light fuel oil testing 25° API or higher, viscosity below 45 SUS, and high sulfur, derived from petroleum refining.
No. 3 Fuel Oil (High Sulfur Diesel Equivalent)
Blended No. 3 light fuel oil with over 500 ppm sulfur, used in industrial heating and diesel applications from petroleum sources. Classified in 2710.19.11.04 for its light viscosity (<45 SUS at 37.8°C), high API gravity, and fuel oil designation excluding waste or biodiesel.
Industrial High-Sulfur Diesel Fuel No. 2-D
No. 2-D grade diesel for stationary industrial engines, sulfur >500 ppm, from bituminous mineral oils. Meets 2710.19.11.04 as light fuel oil with requisite viscosity, API, and sulfur levels, prepared with ≥70% petroleum oils.
Off-Highway High Sulfur Diesel (No. 2)
Diesel fuel designated for off-highway vehicles and equipment with >500 ppm sulfur from refined petroleum. Precisely matches 2710.19.11.04 light fuel oil parameters: API ≥25°, viscosity <45 SUS, excluding biodiesel/waste.