Containing more than 500 ppm of sulfur
Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Fuel oils Nos. 2 and 3: > Diesel oil: > Containing more than 500 ppm of sulfur
Duty Rate (from China)
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Products classified under HTS 2710.19.11.04
No. 2 Diesel Fuel Oil (High Sulfur)
A middle distillate petroleum oil classified as No. 2 diesel fuel with sulfur content exceeding 500 ppm, derived from refining crude oil or bituminous minerals. It meets the criteria for subheading 2710.19.11.04 due to its API gravity of 25 degrees or more, Saybolt Universal viscosity under 45 seconds at 37.8°C, and use as a light fuel oil for diesel engines. This product is not crude, contains no biodiesel, and is not waste oil.
No. 2-G Diesel Fuel (High Sulfur Grade)
No. 2-G grade diesel oil for off-road and general use, with sulfur over 500 ppm, obtained from bituminous mineral distillation. It qualifies under HTS 2710.19.11.04 as a light fuel oil (Nos. 2 and 3) with the specified API gravity, low viscosity, and high sulfur profile, excluding biodiesel blends.
High Sulfur Marine Diesel Oil (MDO No. 2)
Marine distillate fuel oil equivalent to No. 2 diesel with sulfur content above 500 ppm, used in auxiliary engines. This product fits HTS 2710.19.11.04 precisely as a light fuel oil testing 25° API or higher, viscosity below 45 SUS, and high sulfur, derived from petroleum refining.
No. 3 Fuel Oil (High Sulfur Diesel Equivalent)
Blended No. 3 light fuel oil with over 500 ppm sulfur, used in industrial heating and diesel applications from petroleum sources. Classified in 2710.19.11.04 for its light viscosity (<45 SUS at 37.8°C), high API gravity, and fuel oil designation excluding waste or biodiesel.
Industrial High-Sulfur Diesel Fuel No. 2-D
No. 2-D grade diesel for stationary industrial engines, sulfur >500 ppm, from bituminous mineral oils. Meets 2710.19.11.04 as light fuel oil with requisite viscosity, API, and sulfur levels, prepared with ≥70% petroleum oils.
Blended High-Sulfur Light Fuel Oil No. 2
Blended distillate fuel oil No. 2 with sulfur exceeding 500 ppm for boiler and burner use. Falls under HTS 2710.19.11.04 as a preparation ≥70% petroleum oils, light viscosity, high API, specifically for fuel Nos. 2/3.
Off-Highway High Sulfur Diesel (No. 2)
Diesel fuel designated for off-highway vehicles and equipment with >500 ppm sulfur from refined petroleum. Precisely matches 2710.19.11.04 light fuel oil parameters: API ≥25°, viscosity <45 SUS, excluding biodiesel/waste.