On-Road Compliant ULS Diesel
Ultra-low sulfur diesel specifically formulated for highway vehicles, ≤15 ppm S, meeting 2710.19.11.02 with light fuel oil specs: API ≥25°, viscosity <45s at 37.8°C. Petroleum-based No. 2 distillate excluding waste or biodiesel. Reduces SOx emissions per Clean Air Act.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing >15 ppm sulfur (general No. 2)
Standard No. 2 fuel without ultra-low sulfur spec uses 2710.19.11.30.
If
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Mark barrels with 'DYED? NO - FOR HIGHWAY USE' to distinguish from off-road; provide bill of lading specifying sulfur ppm; monitor for microbial contamination in transit
Related Products under HTS 2710.19.11.02
Ultra-Low Sulfur Diesel Fuel No. 2
This is a light distillate fuel oil classified as No. 2 diesel with sulfur content not exceeding 15 ppm, meeting the specifications for 2710.19.11.02 due to its API gravity of 25 degrees or more, Saybolt Universal viscosity under 45 seconds at 37.8°C, and use as a primary fuel for diesel engines. It is refined from petroleum or bituminous minerals, excluding crude, biodiesel, and waste oils. Commonly used in on-road vehicles to comply with EPA emissions standards.
Low-Sulfur Automotive Diesel Fuel
Refined No. 2 diesel oil for passenger cars and trucks, containing ≤15 ppm sulfur, API gravity ≥25°, and viscosity <45 Saybolt Universal seconds at 37.8°C, fitting HTS 2710.19.11.02 as a distillate light fuel oil. Derived from petroleum, it powers compression-ignition engines in on-highway applications. Meets stringent environmental standards for reduced emissions.
No. 2-G Grade Diesel Fuel
Grade No. 2-G diesel per ASTM D975, ultra-low sulfur (≤15 ppm), suitable for general on-road use with API ≥25° and low viscosity <45s at 37.8°C, precisely matching HTS 2710.19.11.02 criteria for light distillate fuel oils. It's a straight-run or cracked petroleum distillate used in trucks and buses. Ensures compliance with highway diesel sulfur caps.
Winterized Ultra-Low Sulfur Diesel
No. 2 diesel additized for cold weather performance, ≤15 ppm sulfur, API ≥25°, viscosity <45s, classified under HTS 2710.19.11.02 as it remains a basic petroleum distillate fuel oil preparation >70% oils. Prevents gelling in sub-zero temperatures for reliable engine starts. Used in northern climates for vehicles.
High Cetane Index Diesel Fuel No. 2
Premium No. 2 diesel with enhanced cetane index >45 and ≤15 ppm sulfur, API ≥25°, <45s viscosity, fitting HTS 2710.19.11.02 for low-sulfur light distillate fuel oils from petroleum. Improves combustion efficiency in modern diesel engines. Ideal for heavy-duty trucks.
ASTM D975 No. 2 Diesel Grade S15
Grade S15 No. 2 diesel per ASTM D975, sulfur ≤15 ppm, light oil properties (API ≥25°, visc <45s), classified in HTS 2710.19.11.02 as non-crude petroleum distillate fuel. For diesel-powered equipment on public roads. Standard for U.S. fuel quality.