Argentite Ore

Argentite (Ag2S) is a primary silver sulfide ore mined from hydrothermal veins, containing 87% silver by weight. It falls under HTS 2616.10.00 as a silver ore and concentrate used for precious metal extraction. The material is typically crushed and processed via flotation to recover silver concentrates.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
๐Ÿ‡จ๐Ÿ‡ณChinaFree+25.0%25%
๐Ÿ‡ฒ๐Ÿ‡ฝMexicoFreeโ€”Free
๐Ÿ‡จ๐Ÿ‡ฆCanadaFreeโ€”Free
๐Ÿ‡ฉ๐Ÿ‡ชGermanyFreeโ€”Free
๐Ÿ‡ฏ๐Ÿ‡ตJapanFreeโ€”Free

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

2601.20.00Higher: 35% vs 25%

If iron content exceeds silver by value

Ores where iron is the chief metal fall under iron ores in Chapter 26, based on metal value dominance.

2617.10.00Lower: Free vs 25%

If processed into antimonial concentrates

Silver ores containing antimony as a byproduct are classified under antimony ores when antimony predominates.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

โ€ข Obtain assay certificates verifying silver content from accredited labs to support classification and valuation

โ€ข Ensure proper labeling of hazardous materials if containing sulfides; comply with EPA import regulations for ores

โ€ข Avoid misclassification as base metal ores by providing geological reports confirming silver as principal metal

Related Products under HTS 2616.10.00

Cerargyrite Silver Ore

Cerargyrite, or horn silver (AgCl), is a chloride silver ore found in oxidized zones of silver deposits with up to 75% silver content. Classified under HTS 2616.10.00 for silver ores and concentrates. It is crushed and leached for silver recovery in refining processes.

Native Silver Ore

Native silver ore consists of elemental silver grains embedded in gangue rock from epithermal deposits. It qualifies under HTS 2616.10.00 as unrefined silver-bearing material for concentrate production. Milled and gravity-separated to yield high-grade silver concentrates.

Proustite Silver Ore

Proustite (Ag3AsS3) is a silver sulfosalt ore from low-temperature veins, assaying around 60% silver. Falls under HTS 2616.10.00 as silver concentrate precursor. Flotation and roasting recover silver from arsenic-bearing matrix.

Chlorargyrite Concentrate

Flotation concentrate derived from chlorargyrite ore, enriched to 40-60% silver content for smelting. HTS 2616.10.00 covers such silver-bearing concentrates. Directly fed into cyanidation or smelting circuits.

Acantite Flotation Concentrate

Acantite (Ag2S) flotation concentrate from Mexican silver mines, grading 500-800 oz/ton silver. Classified HTS 2616.10.00 for silver concentrates. Shipped to custom smelters for matte production.

Polybasite Silver Ore

Polybasite ((Ag,Cu)16Sb2S11) is a complex silver copper ore from epithermal deposits with 50-70% Ag equivalent. HTS 2616.10.00 applies as silver-dominant ore. Processed via selective flotation.