Heavy Basalt Building Block
Roughly trimmed rectangular basalt block sawn to over 7.5 cm thick, intended for structural building walls or facades in construction projects. Classified under HTS 2516.12.0030 as 'other monumental or building stone' merely cut into rectangular slabs or blocks meeting the thickness criterion.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If machined, polished, or otherwise worked beyond mere sawing
Any further processing moves basalt to heading 6802 for worked building stone.
If roughly trimmed but not sawn into rectangular blocks or slabs
Unsawn, roughly squared stone falls under the prior subheading 2516.11.
If for use as curbstones or setts in paving
Chapter note (f) excludes curbstones and setts to heading 6801.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include quarry origin certificates to confirm basalt type and compliance with 'merely cut' processing limits
• Avoid bundling with mortar or fittings, as that could reclassify as a set under different headings
• Watch for customs scrutiny on 'roughness'; excessive trimming may trigger worked stone classification
Related Products under HTS 2516.12.00.30
Thick Granite Countertop Slab
A large rectangular granite slab, sawn to dimensions with a thickness exceeding 7.5 cm, used primarily for fabricating kitchen countertops and bathroom vanities. It falls under HTS 2516.12.0030 as monumental or building stone merely cut by sawing into blocks or slabs of rectangular shape, with the specified minimum thickness, and not further worked.
Thick Granite Paving Slab
Heavy-duty granite slab, rectangular and sawn to 8-10 cm thickness, designed for heavy-traffic paving in plazas or driveways. Classified in HTS 2516.12.0030 as granite building stone meeting the rectangular slab and thickness specs, not yet setts or curbstones.
Basalt Cladding Panel Blank
Rectangular basalt slab thicker than 7.5 cm, sawn as a blank for later processing into wall cladding panels. HTS 2516.12.0030 applies as basalt building stone merely cut by sawing into qualifying rectangular slabs.
Sandstone Column Base Block
Sawn sandstone block over 7.5 cm thick, rectangular for use as bases in architectural columns or pillars. Meets HTS 2516.12.0030 for sandstone slabs of specified thickness, merely cut.
Thick Sandstone Wall Slab
Rectangular sandstone slab sawn to a thickness of 7.5 cm or greater, used for exterior wall cladding in architectural projects. It qualifies for HTS 2516.12.0030 due to being sandstone, a listed building stone, merely cut by sawing without further fabrication.
Porphyry Monumental Block
Large porphyry stone block sawn into rectangular form over 7.5 cm thick, suitable for memorials, sculptures, or grand building bases. Falls under HTS 2516.12.0030 as porphyry, explicitly named monumental stone, roughly trimmed or merely cut.